Microtech Where to get tuning
07-05-06, 01:13 PM
#1
Senior Member
Thread Starter
Join Date: Apr 2004
Location: South Jordan UT
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Where to get tuning
I've got an LTX-8 on my T2 and I need some tuning. I originally went to california to get tuning but the guy doing it didn't know microtechs for s*&^. Then I decided to get a wideband and tune it. I've got it running now with good (not great though) power and not bad for an amateur. it only runs good at 11 or 12 to 1 AFR's. It stops running when cold and surges at cruise, worse when leaner. I'm somewhat pleased with the results as I beat the guy (who came recommended as a good microtech guy) who I paid lots to tune it but I need better. So...where can I go to get a T2 tuned? Anywhere within 800 miles will do if the person is good. The area that results from the 800 mi is anywhere from the california coast do the denver area. Please help or I'm gonna go crazy!!
07-12-06, 11:55 AM
#3
Stan-
you should call up Christian over at Cobb Tuning. They're just off I 215 at about 30th south in salt lake. he use to be the brains behind Modern Garage.
he's a busy guy, but he'll be tuning my 20b with a LTX12S. He's good at a bunch of different systems. I'm not sure how much it'll cost or if he even has time, but he's damn good and worth a phone call. All he does is tune, and teach people how to tune.
you should call up Christian over at Cobb Tuning. They're just off I 215 at about 30th south in salt lake. he use to be the brains behind Modern Garage.
he's a busy guy, but he'll be tuning my 20b with a LTX12S. He's good at a bunch of different systems. I'm not sure how much it'll cost or if he even has time, but he's damn good and worth a phone call. All he does is tune, and teach people how to tune.
Thread
Thread Starter
Forum
Replies
Last Post
demetlaw
3rd Generation Specific (1993-2002)
6
10-02-15 06:22 PM