zeaone

well i installed a microtech got it running pretty good but know my a/c dosn't work i know i have to hook two wires together but which ones and were are they located please help i live in miami and it's getting hot

rx72c

iTrader: (8)

I will check on my s5 but im sure i bridged one wire from the a/c fan to the a/c relay.

zeaone

Found it i just briged blue/white and blue /orange up at the relay in the engin compartment

rx72c

iTrader: (8)

Good stuff mate.
Have you noticed that the comrpessor is no longer switching off? Or is it switching off and on as per normal?

zeaone

Well i removed the main controller to make room for gauges and i hooked blower high speed and compressor to a switch that goes to ground so it only works on high . Fine for me im in the hottest state it blowes 47f

rx72c

iTrader: (8)

hahahaha. Funny ****. Good work.
Put up a wiring diagram for the aircon mod and dash mod.
Im sure others will appreciate it.

zeaone

Well i just used a test light to ground and stared probing when you here compressor clickand blower turn on just wire them through switch to ground and WWWWWWWaaaaaaLLLLLLLLLLaaaaaaaaaaaa Know you have room for three 2" gauges Fairly easy mod

zeaone

ok got a/c working fine but know when im on idle car leans out and turns off is there any way to make microtech see that a/c is on and automaticly adjust for a/c like it does for e fan