Microtech It runs
#1
Professor D.P
Thread Starter
It runs
After some major headaches (mostly my fault) I got the car running.
I managed to delete the base map, and had to have someone load some more maps in a new adapter for me, since my basic knowledge wasn't enough to make a map to start the car. It would be really nice if someone had a text copy of EVERY setting in the base map. I know there is spread sheet with fuel and timing but a complete set would be great. It would also be really nice to be able to download a map, which to my knowledge is not currently possible, although it may be in the near future. For my own purposes I am going to try and make a text copy of all the settings and make it available to everyone who might need it.
Now with all that said and once I actually had a real base map loaded, I calibrated the TPS, tuned the key, set the timing, and the car idled great, and rev'd nice and smooth. It drives pretty good as well, it's got some issues as soon as it see's even a little positive manifold pressure but that's what tunning's for right?
All in all I'm pretty happy with the Microtech, a few problems, mostly caused by my own stupidity and the fact there is NO one in my area who knows anything about the system. I have faith that in the near future more support will come.
Cheers
Graham
I managed to delete the base map, and had to have someone load some more maps in a new adapter for me, since my basic knowledge wasn't enough to make a map to start the car. It would be really nice if someone had a text copy of EVERY setting in the base map. I know there is spread sheet with fuel and timing but a complete set would be great. It would also be really nice to be able to download a map, which to my knowledge is not currently possible, although it may be in the near future. For my own purposes I am going to try and make a text copy of all the settings and make it available to everyone who might need it.
Now with all that said and once I actually had a real base map loaded, I calibrated the TPS, tuned the key, set the timing, and the car idled great, and rev'd nice and smooth. It drives pretty good as well, it's got some issues as soon as it see's even a little positive manifold pressure but that's what tunning's for right?
All in all I'm pretty happy with the Microtech, a few problems, mostly caused by my own stupidity and the fact there is NO one in my area who knows anything about the system. I have faith that in the near future more support will come.
Cheers
Graham
#4
Professor D.P
Thread Starter
Thanks
Ya it was about time
It was a ton of weight off my shoulders. I'm going to hook up the wideband and go to town. Hopefully I'll get the motor broken in before the snow starts to fall.
Ya it was about time
It was a ton of weight off my shoulders. I'm going to hook up the wideband and go to town. Hopefully I'll get the motor broken in before the snow starts to fall.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
turbo-minivan
General Rotary Tech Support
69
02-04-16 12:29 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM