Microtech lt8s installation HELP!!!
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: LI
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
lt8s installation HELP!!!
So this is my first time installing a standalone. I'm doing it on my 88 rx7 gxl with a TII swap. I came across a problem when i got to step 6 - Coils and Ignition System. I am running 3 MSD 6AL boxes with 4 Blaster ss coils. How do I run this?!?!?! Also I need to know how to run the fuel pump, and the rpm gauge. Thanks.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
You need to retain the stock ignitors with the Microtech. So you will connect it per the manual, then connect your MSD boxes to the output of the stock ignitors.
Connect your tach to the negative of one of the trailing coils.
As for the fuel pump, follow the instructions in the Microtech manual. It's just a simple relay and the diagrams are in the manual.
Connect your tach to the negative of one of the trailing coils.
As for the fuel pump, follow the instructions in the Microtech manual. It's just a simple relay and the diagrams are in the manual.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM