lowkee33

iTrader: (8)

I bought an LT8 from a guy that had it on a wrx. He sold it to us and said it would work for the RX7 I would just have to change the settings manually. I have read that you cannot use them on other vehicles because they are car specific and I have been told you can run it. Could someone give me a straight answer.

If I can run it I am running 87 TII with RB exhaust, 4x750cc,walbro fp, the rest is stock. I have the microtech installed and seems to be wired correctly I have power the amber light flashes when cranked over. I have checked fuel, and spark and they are good. The car will start to start but then die. I have been pulling the plugs and they are getting soaked so I took fuel out and still not starting. I also got all brand new plugs because I found that one of my plugs was dead.

One last question can someone tell me what the aux settings for the LT8 are supposed to be set at.

Thank you all help is greatly appreciated.

lowkee33

iTrader: (8)

No one can answer any of these questions. Please someone help me!

Johny zoom

iTrader: (5)

I have a microtech, I think they are car specific, You could go to the microtech forum. or check with rx72c. or central Fla turbo. Or any authorized dealer. hop this helps

Johny

rx72c

iTrader: (8)

Did you send me a pm?

Anyways.
No it will most likely not work.

Needs to be setup for a rotary. Send back to Aus microtech and get it redone.

lowkee33

iTrader: (8)

Yeah I did pm you and Thank you for your help.