Microtech Area is for discussing Microtech systems

Microtech idle problems

Thread Tools
 
Search this Thread
 
Old Jul 17, 2005 | 11:13 PM
  #1  
trick794's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 6
Likes: 0
From: chicago
idle problems

have LT8, street port, 850 pri and 1600 sec. I can only get the car to run a 12.0 on the wide band. I try to lean it out about the car hunts. I was wondering if this is normal? Tim at mircotech told me to check my timing. I'v tried the timing in different places and no difference. Fuel pressure is set at 40 psi.
Reply
Old Aug 16, 2005 | 09:33 PM
  #2  
rosey's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2003
Posts: 535
Likes: 0
From: WI
I have almost the same problem, it likes about 12-12.5 AFRs at idle and hunts above that. I'm pretty sure my timming is on, and I've heard rotaries like rich idles(although perhaps not THAT rich ) So far I've just left it as it idles fine right around 12:1
Reply
Old Aug 16, 2005 | 10:44 PM
  #3  
1sgen's Avatar
583 rwhp 1st gen
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jul 2004
Posts: 397
Likes: 0
From: texas
mine is exacty the same and my timing is good .
Reply
Old Aug 16, 2005 | 11:36 PM
  #4  
10sec rx7's Avatar
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 1,353
Likes: 9
From: Sydney, Australia
sotck or ported motors??
Reply
Old Aug 17, 2005 | 12:16 AM
  #5  
jamespond24's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 20 Years
iTrader: (13)
 
Joined: Aug 2002
Posts: 4,152
Likes: 0
From: Pittsburg, KS.
my has a street port and when I set the A/fs around 14.7 the car die out after 20 second of running. Now I had it at around 12.2-12.5 at idle.
Reply
Old Aug 17, 2005 | 01:41 AM
  #6  
Iwan's Avatar
Senior Member
Tenured Member: 20 Years
 
Joined: May 2003
Posts: 257
Likes: 2
From: Munich, Germany
Hi,
my cars idle is at about 11.1to 11.2 AFR on wideband with no problems.
I see no reason to change or lean it out.
What do you try to get and why?

REgards
Iwan
Reply
Old Aug 17, 2005 | 02:22 PM
  #7  
fastcarfreak's Avatar
3rd motors a charm I hope
Tenured Member 15 Years
 
Joined: Apr 2003
Posts: 2,054
Likes: 0
From: Central New York
mine idles at 11.4-11.5 afr. seems to like it there.

adam
Reply
Old Aug 17, 2005 | 06:46 PM
  #8  
10sec rx7's Avatar
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 1,353
Likes: 9
From: Sydney, Australia
ported engine running at 12.5:1 at idle is fine, a stock port will run at around 13.5 no problems at all
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 10:38 AM.