Microtech i am now a microtech guy
09-05-03, 10:11 PM
#1
Just Call Me Terminator!
Thread Starter
iTrader: (4)
Join Date: Feb 2001
Location: NJ
Posts: 7,848
Likes: 0
Received 0 Likes
on
0 Posts
i am now a microtech guy
bought a 90 T2 and it has a LT8 in it. its all rigged up.... i have to redo the whole thing. including the whole car. i'm sure i will have some interesting questions. my FD is running a haltech E6K so now i will have a back to back comparison of the systems 
09-05-03, 11:34 PM
#3
Just Call Me Terminator!
Thread Starter
iTrader: (4)
Join Date: Feb 2001
Location: NJ
Posts: 7,848
Likes: 0
Received 0 Likes
on
0 Posts
i took some pix oh my god
four power wires soldered into a giant ball.... air temp sensor not even hooked up.... coils wired up all crazy
i don't even want to think about it
i pulled the whole harness out. engine is coming maybe tomorrow night or sunday. its a big project but it shouldn't take long to get it up and running the way its supposed to be
four power wires soldered into a giant ball.... air temp sensor not even hooked up.... coils wired up all crazy
i don't even want to think about it
i pulled the whole harness out. engine is coming maybe tomorrow night or sunday. its a big project but it shouldn't take long to get it up and running the way its supposed to be
09-06-03, 09:37 AM
#5
Full Member
Join Date: Feb 2002
Location: WA.
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Do you have a copy of the wiring harness diagram? I think you can download it on one of the sites, otherwise I could scan you a good copy, it might help out. Sometimes I get the feeling your 3rd gen is cursed
09-07-03, 12:11 PM
#7
Rotary Enthusiast
Join Date: Aug 2001
Location: Tallahassee, FL
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
Vosko, welcome to the "dark side". 
If you need a wiring diagram, you can find them on our website in PDF format. If your harness is trashed, new ones are pretty cheap and are readily available. And as always, if you've got questions, ask 'em - there's lots of help readily available here.
Brandon
BR7 Racing
If you need a wiring diagram, you can find them on our website in PDF format. If your harness is trashed, new ones are pretty cheap and are readily available. And as always, if you've got questions, ask 'em - there's lots of help readily available here.
Brandon
BR7 Racing
Trending Topics
09-08-03, 04:41 PM
#9
Just Call Me Terminator!
Thread Starter
iTrader: (4)
Join Date: Feb 2001
Location: NJ
Posts: 7,848
Likes: 0
Received 0 Likes
on
0 Posts
well engine is out. i think the harness is still usable. if not i will purchase a new one
http://www.vosko.net/photos/whitet2/3/DSCF0017.JPG
http://www.vosko.net/photos/whitet2/3/DSCF0021.JPG
judge has played with microtechs but he likes haltechs better.
yup i bought the car from ben in michigan. it was an adventure to say the least and the car was in MUCH worse condition than he described..... it will turn out nice but its gonna take some time.
engine is out started stripping down the engine bay so i can repaint it. right now its three different colors, white,offwhite and rust. i *COULD* have the car running in a week but i want to do it right and not have to mess with it again.
i am getting some pricing on turbo kits. i don't want anything huge like the T78 on my FD. something streetable good for 400rwhp with not alot of lag.
engine had so much carbon in it. so i dumped a whole bunch of atf in it to clean it up.
i'm going to download the wiring diagram maybe later today. i am also going to throw in my spare 1600cc secondaries in.
the goal is to get a decent turbo kit, fmic, and i need a catback too
good thing i have the FJO from my FD to tune this car
oh yeah more pix
http://www.vosko.net/photos/whitet2/3/
http://www.vosko.net/photos/whitet2/3/DSCF0017.JPG
http://www.vosko.net/photos/whitet2/3/DSCF0021.JPG
judge has played with microtechs but he likes haltechs better.
yup i bought the car from ben in michigan. it was an adventure to say the least and the car was in MUCH worse condition than he described..... it will turn out nice but its gonna take some time.
engine is out started stripping down the engine bay so i can repaint it. right now its three different colors, white,offwhite and rust. i *COULD* have the car running in a week but i want to do it right and not have to mess with it again.
i am getting some pricing on turbo kits. i don't want anything huge like the T78 on my FD. something streetable good for 400rwhp with not alot of lag.
engine had so much carbon in it. so i dumped a whole bunch of atf in it to clean it up.
i'm going to download the wiring diagram maybe later today. i am also going to throw in my spare 1600cc secondaries in.
the goal is to get a decent turbo kit, fmic, and i need a catback too
good thing i have the FJO from my FD to tune this car
oh yeah more pix
http://www.vosko.net/photos/whitet2/3/
09-08-03, 04:49 PM
#10
Full Member
Join Date: Oct 2002
Location: hopewell junction ny
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Hey vosko looks like you have your hands full. Good luck and let us know what you think of the Microtech...........
Thanks,
Craig K
www.drivinhard.com
Thanks,
Craig K
www.drivinhard.com
09-10-03, 01:41 PM
#14
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Ryde _Or_Die
Have you had this turbo? I've thought about going with it, but might just go with a 60-1 now for spool up.
Have you had this turbo? I've thought about going with it, but might just go with a 60-1 now for spool up.
I dream of the day that I can spend money like vosko..
09-10-03, 07:28 PM
#16
Just Call Me Terminator!
Thread Starter
iTrader: (4)
Join Date: Feb 2001
Location: NJ
Posts: 7,848
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Josepi
No, but it should be sized well for what he said.
I dream of the day that I can spend money like vosko..
No, but it should be sized well for what he said.
I dream of the day that I can spend money like vosko..
Thread
Thread Starter
Forum
Replies
Last Post