Microtech Area is for discussing Microtech systems

Microtech higher rpm misfire HELP!

Old 09-14-10, 04:54 PM
  #1  
Junior Member

Thread Starter
 
arc_55's Avatar
 
Join Date: Dec 2005
Location: Toronto
Posts: 29
Likes: 0
Received 1 Like on 1 Post
higher rpm misfire HELP!

Around 6500+ there seems to be a slight misfire at 10psi on a hybrid t3t4 turbo. The engine is a t2 on microtech and my timing is 18* i couldnt tell you my split at the moment i would have to check. Air fuel ratio is in the low 11's.

Any help or input would be appreciated!
Old 09-14-10, 08:53 PM
  #2  
Rotary Freak

iTrader: (8)
 
rx72c's Avatar
 
Join Date: Jun 2003
Location: Australia
Posts: 2,795
Received 109 Likes on 61 Posts
lean the mixtures back to high 11s low 12s
Old 09-14-10, 09:16 PM
  #3  
Junior Member

Thread Starter
 
arc_55's Avatar
 
Join Date: Dec 2005
Location: Toronto
Posts: 29
Likes: 0
Received 1 Like on 1 Post
I wil try leaning it out slowly and see if it begins to get better. I will keep you updated thank you!
Old 09-14-10, 09:30 PM
  #4  
Sharp Claws

iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,107
Likes: 0
Received 41 Likes on 40 Posts
hotter plugs will help as well.
Old 09-15-10, 09:16 AM
  #5  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
Less timing...It should be fine and happy around 11.5:1. I personally wouldn't run 18 degrees and AFRs in the low 12s. Not saying that won't work though. Condition of the plugs and wires?
Old 09-16-10, 05:19 PM
  #6  
Junior Member

Thread Starter
 
arc_55's Avatar
 
Join Date: Dec 2005
Location: Toronto
Posts: 29
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Aaron Cake
Less timing...It should be fine and happy around 11.5:1. I personally wouldn't run 18 degrees and AFRs in the low 12s. Not saying that won't work though. Condition of the plugs and wires?
I am also suspecting bad spark plug wires and the plugs are newer and in good condition i pulled them recently.

I will play around some more this coming weekend with the car.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Prediict
2nd Generation Specific (1986-1992)
32
11-18-15 08:41 AM
dona1326cosprings7
1st Generation Specific (1979-1985)
4
10-29-15 06:47 AM
RX200013B
Haltech Forum
7
10-12-15 09:45 PM
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM
subeone
General Rotary Tech Support
0
09-24-15 09:58 PM


Thread Tools
Search this Thread
Quick Reply: Microtech higher rpm misfire HELP!



All times are GMT -5. The time now is 04:46 PM.