Microtech hi imp. or low imp. injectors?
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Houston, TX USA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
hi imp. or low imp. injectors?
I plan to buy the microtech EMS this month and I want to upgrade my injectors but I don't know if I need hi or low imp. I was planing to run 4 720cc injectors unless you guys recomend something else.
This is on a j-spec s5engine thats going in an s4 car.
-Bill
This is on a j-spec s5engine thats going in an s4 car.
-Bill
#2
Rotary Enthusiast
Join Date: Aug 2001
Location: Tallahassee, FL
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
The Microtech is stable to 1.5-2.5 Ohms, according to the manual. Dale says that they have 4 Amp injector drivers, which Ohm's Law says necessitates 3.5 Ohm injectors at 14 V. As resistance goes up, current goes down, so you can basically use any injector you want.
Brandon
BR7 Racing
Brandon
BR7 Racing
#6
Rotary Freak
GSLSE injectors are 760cc (I know people say 680 but they flow 760)
850cc injectors can be bought from www.injector.com for about 90 bux each. They will require modification to fit into stock fuel rail.
850cc injectors can be bought from www.injector.com for about 90 bux each. They will require modification to fit into stock fuel rail.
Trending Topics
#8
Rick James
Join Date: Sep 2002
Location: Under The Hood In FL
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SaabGuy
GSLSE injectors are 760cc (I know people say 680 but they flow 760)
850cc injectors can be bought from www.injector.com for about 90 bux each. They will require modification to fit into stock fuel rail.
GSLSE injectors are 760cc (I know people say 680 but they flow 760)
850cc injectors can be bought from www.injector.com for about 90 bux each. They will require modification to fit into stock fuel rail.
I have the print out that they gave me when they did them. I can try & dig it up if you want. They may be able to flow more if you up the duty cycle but, after you start to run them that hard, their not going to last long.
#12
Rick James
Join Date: Sep 2002
Location: Under The Hood In FL
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
The link saabguy put up has low imp. 1600cc injectors for $110 each that BOLT RIGHT IN. Call the guy @ the phone # & tell him you want a pair for the 86-91 RX-7.
The I have seen 1600cc injector for that price before, but, Never ones that you don't have to mod the fuel rail for. Great deal!
The I have seen 1600cc injector for that price before, but, Never ones that you don't have to mod the fuel rail for. Great deal!
Thread
Thread Starter
Forum
Replies
Last Post