well i pretty much have to stock sensor plugs and what not ready except the tps im having trouble with the diagram and im lost in which wires goto which stock re cosmos tps pin outs i know theirs 3 wires from the lt10 that goes to 3 out of 4 plugs i need to know what goes into where...

thanks

 

youll only use 3 wires. Im pretty sure last time i did one it was the same as an FD.

 

i know ill be using only 3 wires and one pin off the tps will be unused... trying to figure out what with goes to which pin

 

use the s6 diagram

http://www.microtechefi.com/pdf/TPSDiag.pdf

 

20b and 13b re use the same tps as fd?

 

?? bump

 

Yes they do mate.

 

i used the s6 diagram...worked fine for me

 

Good stuff mate.

 

I got a fd tps and a cosmo 13b re tps, the spin in different directions? I got the 13b re intake manifold on my fd motor and the cosmo tps does not plug into the one on the fd, so I pulled the one from the fd manifold to put on there and realized it doesn't work... What is my way around this problem!!! Please help me!!

 

Easy clip the wires from the harness plug, then reroute them accordingly solder and heat shrink... I've done it before