Microtech Area is for discussing Microtech systems

Microtech dwell

Thread Tools
 
Search this Thread
 
Old Jul 10, 2010 | 02:14 AM
  #1  
tony94s4's Avatar
Thread Starter
Corn Fed FD
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2008
Posts: 409
Likes: 1
From: fort worth
dwell

hello guys,

whats the most dwell I can run on my lt10 with x4 box and bosch coils?
we kept raising the dwell and each time it cleand up on top and gaind hp,
we stoped at 4.75, can I try 5 or am I alredy working them coils hard?

thnx
Reply
Old Jul 10, 2010 | 03:37 AM
  #2  
mattmarrx3's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 115
Likes: 0
From: nz
and what sthe best for a 13 b j port was on 3.50
Reply
Old Jul 11, 2010 | 04:57 PM
  #3  
tony94s4's Avatar
Thread Starter
Corn Fed FD
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2008
Posts: 409
Likes: 1
From: fort worth
so any one runin 5ms dwell on bosch coils?
Reply
Old Jul 12, 2010 | 10:24 AM
  #4  
C. Ludwig's Avatar
www.lms-efi.com
Tenured Member: 25 Years
Liked
Loved
iTrader: (27)
 
Joined: Mar 2001
Posts: 5,265
Likes: 146
From: Floyds Knobs. IN
What's the Bosch part number for the coils MT sells?
Reply
Old Jul 12, 2010 | 11:58 AM
  #5  
tony94s4's Avatar
Thread Starter
Corn Fed FD
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2008
Posts: 409
Likes: 1
From: fort worth
I got them from MT with the x4 box back when I send my ecu to get updated,
not sure on the part # I need to check
Reply
Old Jul 12, 2010 | 03:46 PM
  #6  
rxspeed7's Avatar
F-IT
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jun 2006
Posts: 995
Likes: 0
From: ocala,fl
what about dwell time on ls1 and ls2 coils? if iirc im running 3.5ms of dwell on ls1 coils
Reply
Old Jul 12, 2010 | 04:29 PM
  #7  
rx72c's Avatar
Rotary Freak
Tenured Member: 20 Years
Top Answer: 1
iTrader: (8)
 
Joined: Jun 2003
Posts: 2,878
Likes: 195
From: Australia
up to 6ms on ls1 coils.


On bosch coils wouldnt be going over 4.5ms. And it would not be because of the coils. it would be because of the x4 box.
Reply
Old Jul 13, 2010 | 12:05 PM
  #8  
tony94s4's Avatar
Thread Starter
Corn Fed FD
Tenured Member 15 Years
iTrader: (1)
 
Joined: Mar 2008
Posts: 409
Likes: 1
From: fort worth
4.75 I am at the edge,
I gained few hp up top from 4.5ms should I go back or stay where I am at?

also at the track I will only run one 8th at a time at time so how much more
I can crank it up to?
and then drop it back down before I leave the track

thnx rx72c
I owe u alot my friend
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
1218
Aug 10, 2016 01:54 PM
fidelity101
Megasquirt Forum
13
Apr 15, 2010 04:05 PM
Jeff20B
1st Gen Archive
567
Nov 2, 2005 01:48 AM




All times are GMT -5. The time now is 04:28 AM.