RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Microtech (https://www.rx7club.com/microtech-111/)
-   -   Microtech dwell (https://www.rx7club.com/microtech-111/dwell-912400/)

tony94s4 07-10-10 02:14 AM

dwell
 
hello guys,

whats the most dwell I can run on my lt10 with x4 box and bosch coils?
we kept raising the dwell and each time it cleand up on top and gaind hp,
we stoped at 4.75, can I try 5 or am I alredy working them coils hard?

thnx

mattmarrx3 07-10-10 03:37 AM

and what sthe best for a 13 b j port was on 3.50

tony94s4 07-11-10 04:57 PM

so any one runin 5ms dwell on bosch coils?

C. Ludwig 07-12-10 10:24 AM

What's the Bosch part number for the coils MT sells?

tony94s4 07-12-10 11:58 AM

I got them from MT with the x4 box back when I send my ecu to get updated,
not sure on the part # I need to check

rxspeed7 07-12-10 03:46 PM

what about dwell time on ls1 and ls2 coils? if iirc im running 3.5ms of dwell on ls1 coils

rx72c 07-12-10 04:29 PM

up to 6ms on ls1 coils.


On bosch coils wouldnt be going over 4.5ms. And it would not be because of the coils. it would be because of the x4 box.

tony94s4 07-13-10 12:05 PM

4.75 I am at the edge,
I gained few hp up top from 4.5ms should I go back or stay where I am at?

also at the track I will only run one 8th at a time at time so how much more
I can crank it up to?
and then drop it back down before I leave the track

thnx rx72c
I owe u alot my friend


All times are GMT -5. The time now is 11:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands