Microtech Coils wiring question
03-29-04, 12:22 PM
#3
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
Correct. Note the yellow wire (TACH OUT) from the trailing coil shouldn't be cut at ALL. That's the tach signal...cut that and you lose your tach till you fix it!
03-29-04, 01:19 PM
#4
Microtech Tuning!
Thread Starter
Join Date: Feb 2002
Location: 626 Socal
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! The yellow (tach out) wire runs off the trailing coil 2 right? From the Microtech diagram, there are only the 2 wires coming off the trailing coil 1, but 4 coming off the trailing coil 2 (2 of which I drew in my pic).
03-29-04, 02:17 PM
#5
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Infini IV
Thanks! The yellow (tach out) wire runs off the trailing coil 2 right? From the Microtech diagram, there are only the 2 wires coming off the trailing coil 1, but 4 coming off the trailing coil 2 (2 of which I drew in my pic).
Thanks! The yellow (tach out) wire runs off the trailing coil 2 right? From the Microtech diagram, there are only the 2 wires coming off the trailing coil 1, but 4 coming off the trailing coil 2 (2 of which I drew in my pic).
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM