Microtech Area is for discussing Microtech systems

Microtech Checking timing 13b turbo?

Thread Tools
 
Search this Thread
 
Old 10-16-18, 05:03 AM
  #1  
Full Member

Thread Starter
 
YLD 78U's Avatar
 
Join Date: Dec 2006
Location: Australia
Posts: 234
Received 22 Likes on 21 Posts
Checking timing 13b turbo?

So the car has been sitting for the last 9 months. Nothing has changed.

It used to run fine, on a MT8 -
I haven't touched the CAS at all.
I have turned the motor by hand the last 9 months with pre mix 2 stroke.
Installed the LT10c
Wired up the same way, basically - the CAS should know where HOME is correct? the Dashboard says its OK - and no errors. TPS is all calibrated etc etc, no other errors showing.

I am having issues with retarded timing (idling) from what we can tell as the exhaust runners glow red (also cat) after about 3-5mins if just idling... So it starts within 5 seconds and idles to what sounds OK?

Having nothing has changed is it still possible for timing to be slightly lost from what i have done?
Tripled checked the coil wiring (running GTR R35 coil packs), and it looks fine. Triple checked the CAS wiring and also looks OK.

The motor is also a Semi-bridgeport (secondary only)
Old 10-17-18, 02:47 PM
  #2  
Senior Member

iTrader: (1)
 
BluRR's Avatar
 
Join Date: Apr 2006
Location: Jamaica
Posts: 480
Likes: 0
Received 4 Likes on 4 Posts
If everything externally looks fine, then you should probably look at your tune to ensure its not retarded.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wthdidusay82
Microtech
4
03-15-19 05:15 PM
elfking
2nd Generation Specific (1986-1992)
25
02-08-04 09:40 PM
xXHybridXx
2nd Generation Specific (1986-1992)
2
01-01-04 08:24 PM
4ohfour
1st Generation Specific (1979-1985)
7
03-12-02 02:45 PM



Quick Reply: Microtech Checking timing 13b turbo?



All times are GMT -5. The time now is 12:56 PM.