Microtech Calculating max injector duty cycle?
05-28-09, 10:29 AM
#1
Fixed the wheelhop
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: St. Petersburg, FL
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
Calculating max injector duty cycle?
Just wondering if anyone has a graph or something to calculate where my fuel injectors would max out (at a higher boost level). I know Haltech has a "duty cycle" readout, why not Microtech?
Im running a 750/1600 setup, 40 psi base fuel pressure, % of stage is 95, and about 12-13 psi of boost. My inj MS is about 4.85 to 5.50 in higher RPM WOT areas. I guess Im good until I get to about 8-9 MS? When I was running stock injectors and turbo it would read in the 8-9 range, I was told that was close to maxing out.
Im running a 750/1600 setup, 40 psi base fuel pressure, % of stage is 95, and about 12-13 psi of boost. My inj MS is about 4.85 to 5.50 in higher RPM WOT areas. I guess Im good until I get to about 8-9 MS? When I was running stock injectors and turbo it would read in the 8-9 range, I was told that was close to maxing out.
06-10-09, 12:06 PM
#5
See if this offers any help.
http://www.injector.com/injectorselection.php
Some other sites that may give you the information that you are looking for.
http://search.babylon.com/web/caclul...=browsersearch
http://www.injector.com/injectorselection.php
Some other sites that may give you the information that you are looking for.
http://search.babylon.com/web/caclul...=browsersearch
Thread
Thread Starter
Forum
Replies
Last Post
edmcguirk
NE RX-7 Forum
3
05-30-18 06:50 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM
