post a datalog of when it stalls. It's difficult to debug this stuff remotely even with a datalog. It's nearly impossible without.

Ken

 

I will post one up tomorrow first thing. I wanted to also say that I used output test mode with injectors on and I'm not seeing any flashing at the IXD chip on MS V3 board. Should I be getting a flashing LED at the input or output of the chip?

 

Depends on what LED you're talking about...

Ken

 

it's one of the leds from the jimstim used to test the ignition.

 

Then it depends on how you wired it, and I have never heard of anyone testing that way. Picture?

Also, msq?

Ken

 

well here is the datalog i think i did it right. please let me know what you find wrong with it.

 

OK what I wanted was a picture of your wiring to the jimstim, and your settings saved to an msq file from the MS.

Ken

 

oh ok you asked for the datalog and thats it there. i will post pic of the wiring tomorrow if i can. i dont have a camera on hand now.

heres an update though. i replaced the IXD chip for INJ circuit and Q22 and Q23 to try to get the vr circuit to work on board and still nothing on the main vr circuit so i am still using the dual vr board for both vr signals.

maybe the pics will tell more.

 

I can't get a clear picture right now but here is the msq.