Megasquirt no rpm
#51
i have a new problem. not sure whats going on w/car.
i'll try my best to explain whats happening
when i start tring to start the car i'm using a 33k res.(after i regrounded everything i needed less of a res.)
i can get it to run (at the most ten mins)but after changing some numbers for about a hour or two. the resistor amount needs to be changed to less of a resistince about 10k.
can some one shed some light on this please .
thanks for your help
i'll try my best to explain whats happening
when i start tring to start the car i'm using a 33k res.(after i regrounded everything i needed less of a res.)
i can get it to run (at the most ten mins)but after changing some numbers for about a hour or two. the resistor amount needs to be changed to less of a resistince about 10k.
can some one shed some light on this please .
thanks for your help
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM