Has anyone sucessfully setup Highres on a rotary yet?

 

I ran it for a while, but I didn't really notice any difference between that and the normal code.

You might notice a difference if you have really large primaries though.

Ken

 

I know I should have researched it first, but is the highres code compatible with MS-I or is it only for MS-II?

 

the hires code is ms1-only, and is limited to those using high-impedance injectors or resistor packs.

MS2/extra has higher resolution than anything on the ms1 is capable of, including the ms1/extra-hires code.

Ken

 

I have High Impedance TII 550cc injectors for primaries and low impedance 870cc siemens injectors for secondaries, so I need to use a resistor anyway.

I might give it a try.


13 days left (+T)