Megasquirt Ms1VE and Spark maps to MS3 Set up.
05-12-13, 06:28 PM
#1
Gen 2 Raced Hard NA 13B
Thread Starter
Join Date: Apr 2006
Location: Canada
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Ms1VE and Spark maps to MS3 Set up.
Hi There
I have several MS1 fuel and spark maps that worked great on my race car. Will the values I input work out to be the same or close to the same if I take the value from my MS1 map and input them on the MS3-Pro map? Will the car run rich or lean or be way off?
My understanding is I can not import them but put them in manually.
Kim
I have several MS1 fuel and spark maps that worked great on my race car. Will the values I input work out to be the same or close to the same if I take the value from my MS1 map and input them on the MS3-Pro map? Will the car run rich or lean or be way off?
My understanding is I can not import them but put them in manually.
Kim
05-13-13, 11:49 PM
#2
Gen 2 Raced Hard NA 13B
Thread Starter
Join Date: Apr 2006
Location: Canada
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Big Differance
The MS 3 Pro is way better for tuning than the old MS1. At this time I have great idle and starting hot. Over the next week I will work out the other areas such as cod start ect. The I will post the program for others to use for start up and slow driving'
Kim
Kim
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM