Megasquirt MS and a street poprted 13b NA
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Rochester NY
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
MS and a street poprted 13b NA
Ok just finished building my MS-1 and everything has tested good. Now I need to configure for the rotary and install. I will be using a manual dizzy so the MS will be fuel only. Car uses the stock intake and TB, 475 primary injectors and 720 secondaries. Can anybody give me some pointers for configuration and base mapping? Thanks.
#2
MegaSquirt Mod
http://www.msefi.com/msinfo/manual/rotary.htm
That has everything you need if you're going to be using a distributor.
msns-extra now supports 2nd and 3rd gen rotary ignition however, so you may want to consider that.
That has everything you need if you're going to be using a distributor.
msns-extra now supports 2nd and 3rd gen rotary ignition however, so you may want to consider that.
#4
MegaSquirt Mod
Originally Posted by EProdRx7
So I tried that damm link 20+ times last night and it wouldn't work but it seems to now. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM