Hi All

In the past I have good success with the Mega Log Viewer and tuning. I could follow the graph and match it up to all my shifting points, throttle points and down shift point when I am on the race track.

But now it seams to be working strange. It shows me on the track and pulling rpm at 3000 to 6000. When in fact I am run 5500 to 8600 during the race. It all so shows my TPS not at full throttle or my MAP at 90 to 100 as it did in the past.

I do have a new lap top. But the Mega Squirt is working fine. I can change programs and tune as it is idling. The rpm on my laptop screen matches the car’s tack, water temperatures are close to the same.

What may I have set up wrong for the Mega Log Veiwer to be off?

Files are to large to attach.

SCCARX7RACER
Kim

 

Make sure the settings under the Options menu and Calculated Fields menu match the old setup. Some fields like AFRs are calculated by MegaLogViewer because the MS only logs voltage.

 

Ok

 

Have a look at this file it makes no sense, Any answers to why it may be doing this. I can change and use my Mega Squirt with no problems. This log came from my last race weekend.