Megasquirt MAP needed for Megasquirt 3 FC
#1
Junior Member
Thread Starter
Join Date: Oct 2018
Location: Oxford
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
MAP needed for Megasquirt 3 FC
I have an 86 fc base with a 75mm turbo and 800cc injectos. it is all wired up to a Megasquirt 3. I am having a really rough time trying to figure out how to make this car run. Im not good at tuning cars as this is my first rotary and my first megasquirt. Does anyone happen to have a MAP that could be close enough to get it running so I could bring it to a tuning shop and have it finished professionally. If you need anymore information please just ask.
#2
Senior Member
iTrader: (1)
I have an 86 fc base with a 75mm turbo and 800cc injectos. it is all wired up to a Megasquirt 3. I am having a really rough time trying to figure out how to make this car run. Im not good at tuning cars as this is my first rotary and my first megasquirt. Does anyone happen to have a MAP that could be close enough to get it running so I could bring it to a tuning shop and have it finished professionally. If you need anymore information please just ask.
Some of the info needed:
Type of coil setup
Using stock CAS or something else?
Primary and secondary injector size.
Fuel pressure.
What kind of sensors are you using (IAT, O2, MAP, TPS etc..)
Turbo size is irrellevant, max boost pressure is needed to set values in the map.
Edit:
If you could post up your current map, that would probably make it easyer for people to help you.
Last edited by Pettersen; 10-18-18 at 02:06 AM.
Thread
Thread Starter
Forum
Replies
Last Post