|
MAP needed for Megasquirt 3 FC
I have an 86 fc base with a 75mm turbo and 800cc injectos. it is all wired up to a Megasquirt 3. I am having a really rough time trying to figure out how to make this car run. Im not good at tuning cars as this is my first rotary and my first megasquirt. Does anyone happen to have a MAP that could be close enough to get it running so I could bring it to a tuning shop and have it finished professionally. If you need anymore information please just ask.
|
Originally Posted by Kai Kraft
(Post 12308129)
I have an 86 fc base with a 75mm turbo and 800cc injectos. it is all wired up to a Megasquirt 3. I am having a really rough time trying to figure out how to make this car run. Im not good at tuning cars as this is my first rotary and my first megasquirt. Does anyone happen to have a MAP that could be close enough to get it running so I could bring it to a tuning shop and have it finished professionally. If you need anymore information please just ask.
Some of the info needed: Type of coil setup Using stock CAS or something else? Primary and secondary injector size. Fuel pressure. What kind of sensors are you using (IAT, O2, MAP, TPS etc..) Turbo size is irrellevant, max boost pressure is needed to set values in the map. Edit: If you could post up your current map, that would probably make it easyer for people to help you. |
Aaron Cake's how-to should be more than enough to get the car up and running: https://www.aaroncake.net/RX-7/megas...rogramMS3X.asp
|
| All times are GMT -5. The time now is 06:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands