Ok I have my plug n play adaptor almost finished. I have been messing with megatune to try and set the settings like in muytaibxr faq. Which version of megatune are the using with the rotary settings? I can't find any of the table that look like any of the screens in the faq. Also on the harness which wires need to be shielded and twisted to gether. I am using the version 3 board and I am cuttint the two teeth out of the cas. I am also making the plug n play adaptor to use the stock harness. Thanks in advance!

 

you need msns-extra 025k or higher... 029g is the last version I've tested, so that'd work too. then you need megatune 2.25, and you need to set it up for msns-extra.

 

Could you point me in the direction on how to flash mine for the msnse, Were do I get the msns extra 025k at? Sorry if they are stupid questions.

 

http://megasquirt.sourceforge.net/extra/

Everything you need should be there.

 

There is so much stuff I get lost in it all. Thankyou for all the help!