Megasquirt Ignition triggers (PINs 25,27,29, and 31)
#1
Senior Member
Thread Starter
Join Date: May 2005
Location: MA
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Ignition triggers (PINs 25,27,29, and 31)
What do I wire Pins 25, 27, 29 to.? I'm kind of lost on that and only that part of the wiring. I tried searching but all I get is just FSM pinouts.. can anyone tell me what to wire it to?
What is Pin 31 on the MS and what does that get wired to?
What is Pin 31 on the MS and what does that get wired to?
#2
Rotary Gearhead
iTrader: (6)
See if this helps:
https://www.rx7club.com/showthread.p...4&page=1&pp=15
Also look at post #4 of this thread:
https://www.rx7club.com/showthread.php?t=466051
https://www.rx7club.com/showthread.p...4&page=1&pp=15
Also look at post #4 of this thread:
https://www.rx7club.com/showthread.php?t=466051
#3
Rotary Enthusiast
Those pins are normally unused. Some MS builders have made use of those pins to send outputs or receive inputs. Did you build your MS? If not, contact the person that did.
Thread
Thread Starter
Forum
Replies
Last Post