Here's the dynosheet from the white rx7 at the West Coast Mega Meet ...

This was run on Scott's Mustang dyno @ Spectre Performance ...

We all had an excellent time there ... there is a post for that though ... on to the tidbits ...

This sheet has my baseline street tune run(I thought it felt ok, but boy did I have room for improvement ) and the pump gas tune as traces.

We dialed in the timing map by a decent amount, but fuel map was pretty close ... all of these runs were at 175 kpa or so (11 psi).

We then threw in some c16, added some timing in and slowly cranked it up to about 220 kpa (18 psi). It was getting quite late, and I was more than pleased with how we did so far ... after looking through some logs, I was only seeing ~60-65% duties, I am sure there is some more room to go, and I think we can dial it in some more at a later date ...

 

Cool! Good to see that here.

Also pretty cool that you think there is some more room to go.

Ken