My 2000 STi vs RX7
#1
Junior Member
Thread Starter
Join Date: Jul 2007
Location: South-East Africa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
My 2000 STi vs RX7
I got beat by a 1999 RX7
Respect to the FD3S..
The owner says it has some fancy parts from a 20B or 22B or something like that. Has bigger ports. Damn.. i got a real good hiding. He was running a really big turbo and 1600cc injectors. Didn't have much time to chat about the rest of the spec.
I'm running a 2000 WRX STi with Airesearch TD05/T04E turbo running 1.3 bar (and the other mods to go with it), and does a 12.8 quarter.
Respect to the FD3S..
The owner says it has some fancy parts from a 20B or 22B or something like that. Has bigger ports. Damn.. i got a real good hiding. He was running a really big turbo and 1600cc injectors. Didn't have much time to chat about the rest of the spec.
I'm running a 2000 WRX STi with Airesearch TD05/T04E turbo running 1.3 bar (and the other mods to go with it), and does a 12.8 quarter.
#5
Senior Member
iTrader: (2)
Join Date: Jan 2005
Location: so cal
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
They made STi's in the GC8 Chassis in Japan.
http://www.j-garage.com/subaru/impreza/gc8/sti.htm
It says Rasonline is from South Africa, so maybe both of the cars were imported from Japan.
http://www.j-garage.com/subaru/impreza/gc8/sti.htm
It says Rasonline is from South Africa, so maybe both of the cars were imported from Japan.
#7
Junior Member
Thread Starter
Join Date: Jul 2007
Location: South-East Africa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Yes the cars are both imports from Japan. My car is pretty quick though and i don't usually lose to RX7s unless they are quite worked on. But this one was something else.. strange thing is the way the engine was modded, you wouldn't really say.. it doesn't look heavily worked on so that is what really got me.
i thought i was about to chalk up anotehr rx7 on the wall... when i launched, my AWD got me a little ahead and into second i expected to start getting away but he just ate up the gap and came from behind then left me like i was standing.
I just learned that the car ran a 10.8 1/4 mile this Sunday, so i kind of feel a little better now.
i thought i was about to chalk up anotehr rx7 on the wall... when i launched, my AWD got me a little ahead and into second i expected to start getting away but he just ate up the gap and came from behind then left me like i was standing.
I just learned that the car ran a 10.8 1/4 mile this Sunday, so i kind of feel a little better now.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jul 2007
Location: South-East Africa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#12
sans FD....
Join Date: Nov 2005
Location: Columbia, LOZ, KCMO, then CO
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
very good death ras.
rx7s usually come with a 13b engine (1.3 liter two rotor). a 20b (2.0 liter THREE rotor) is from another japan only car that mazda made; the Eunos cosmo. even in full stock form, the 20b in an rx7 is impressive.
a 10.8 pass is impressive in itself, but nowhere near the full potential of that motor if he begins to seriously mod it.
rx7s usually come with a 13b engine (1.3 liter two rotor). a 20b (2.0 liter THREE rotor) is from another japan only car that mazda made; the Eunos cosmo. even in full stock form, the 20b in an rx7 is impressive.
a 10.8 pass is impressive in itself, but nowhere near the full potential of that motor if he begins to seriously mod it.
#14
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM