GB:RE-A Style GT Wing
Deposit sent, change my order for a CF wing instead of the FRP unit.
Adam
1. jknapik (CF, FD)
2. Mr. Stock(CF, FD)
3. RacerJason (FRP, FC)
4. integlspwr (FRP, FD)
5. jimmacsrx7 (FRP, FD) - deposit received
6. Mahjik (FRP, FD) - deposit received
7. wum (CF, FD)
8. viciousNY (CF, FC) - deposit received
9. racerxrx7 (CF, FD) - deposit received
10. afgmoto1978 (CF, FD) - deposit received - Prefer support spacing of 1210 mm for custom made supports.
11. OppositionTim (CF, FD) - deposit received
12. Beast From The East (CF, FD) - deposit received
13. cone_crushr (FRP, FC) - deposit received[/SIZE]
Adam
1. jknapik (CF, FD)
2. Mr. Stock(CF, FD)
3. RacerJason (FRP, FC)
4. integlspwr (FRP, FD)
5. jimmacsrx7 (FRP, FD) - deposit received
6. Mahjik (FRP, FD) - deposit received
7. wum (CF, FD)
8. viciousNY (CF, FC) - deposit received
9. racerxrx7 (CF, FD) - deposit received
10. afgmoto1978 (CF, FD) - deposit received - Prefer support spacing of 1210 mm for custom made supports.
11. OppositionTim (CF, FD) - deposit received
12. Beast From The East (CF, FD) - deposit received
13. cone_crushr (FRP, FC) - deposit received[/SIZE]
What Kevin PM me earlier...I hope this is alright to post here.
$50 discount for wings sold without mounts. Retail prices of the wing is $750 (FRP) and $1000 (CF). RX7Club members can get a limited time exclusive discount of 10%. So for orders without mounts, the prices are $625 (FRP) and $850 (CF)
Shipping is $75 to all continental US addresses.
By the way, I don't want wing mounts with my wing thanks.
$50 discount for wings sold without mounts. Retail prices of the wing is $750 (FRP) and $1000 (CF). RX7Club members can get a limited time exclusive discount of 10%. So for orders without mounts, the prices are $625 (FRP) and $850 (CF)
Shipping is $75 to all continental US addresses.
By the way, I don't want wing mounts with my wing thanks.
Deposit sent, change my order for a CF wing instead of the FRP unit.
Adam
1. jknapik (CF, FD)
2. Mr. Stock(CF, FD)
3. RacerJason (FRP, FC)
4. integlspwr (FRP, FD)
5. jimmacsrx7 (FRP, FD) - deposit received
6. Mahjik (FRP, FD) - deposit received
7. wum (CF, FD)
8. viciousNY (CF, FC) - deposit received
9. racerxrx7 (CF, FD) - deposit received
10. afgmoto1978 (CF, FD) - deposit received - Prefer support spacing of 1210 mm for custom made supports.
11. OppositionTim (CF, FD) - deposit received
12. Beast From The East (CF, FD) - deposit received
13. cone_crushr (FRP, FC) - deposit received[/SIZE]
Adam
1. jknapik (CF, FD)
2. Mr. Stock(CF, FD)
3. RacerJason (FRP, FC)
4. integlspwr (FRP, FD)
5. jimmacsrx7 (FRP, FD) - deposit received
6. Mahjik (FRP, FD) - deposit received
7. wum (CF, FD)
8. viciousNY (CF, FC) - deposit received
9. racerxrx7 (CF, FD) - deposit received
10. afgmoto1978 (CF, FD) - deposit received - Prefer support spacing of 1210 mm for custom made supports.
11. OppositionTim (CF, FD) - deposit received
12. Beast From The East (CF, FD) - deposit received
13. cone_crushr (FRP, FC) - deposit received[/SIZE]
You sent the deposit to the wrong person......
I know, fawking quick link feature. Thnx Brian
That sucks!! I am still waiting to see what happens.Kevin is talking to the shipper to get it resolved.Has been a few weeks and nothing yet.
Senior Member
Joined: May 2004
Posts: 326
Likes: 0
From: Niskayuna, NY / Lemoyne, PA
Still unemployed, but I was able to sell off my remaining stocks. I would like to update my shipping address (if I even gave you one), and submit my final payment. Any updates on the FC test fit?
Racing is Life.....
Joined: Nov 2001
Posts: 576
Likes: 0
From: Northern California
Got my wing, questions on mounting
Gang, I got my wing, all intact. Aside from a couple of small blems in the resin finish on one of the wing end plates, it's perfect. Hell, it's going on a race car so who cares, right? I give it 99/100 so far.
Thank you Kevin for filling this niche market.
Now I am thinking about the mounting process. Near as I can tell based on a quick review on the mounts, the brackets are to be connected to the hatch by only two small machine thread screws each, probably #6 Fine in size. That seems very small to me, and the stress on the sheet metal, esp if the wing is bumped from the side (force comes on the end plate, on the same line as the wing), seems like it could be very concentracted and the metal could tear. if the force comes perpendicular to the wing (leading or trailing edge), then the brackets would distribute the force along their entire length and that wouldn't be as bad, but the screws themselves still seem small.....
Am I missing something? Is the stress that the wing is under at 145mph not that great? Are others making mounting plates?
Advice/input welcome.
Thank you Kevin for filling this niche market.
Now I am thinking about the mounting process. Near as I can tell based on a quick review on the mounts, the brackets are to be connected to the hatch by only two small machine thread screws each, probably #6 Fine in size. That seems very small to me, and the stress on the sheet metal, esp if the wing is bumped from the side (force comes on the end plate, on the same line as the wing), seems like it could be very concentracted and the metal could tear. if the force comes perpendicular to the wing (leading or trailing edge), then the brackets would distribute the force along their entire length and that wouldn't be as bad, but the screws themselves still seem small.....
Am I missing something? Is the stress that the wing is under at 145mph not that great? Are others making mounting plates?
Advice/input welcome.
https://www.rx7club.com/jkl-engineering-271/questions-updates-progress-answers-869649/
Check this out...Thanks
Chris
Check this out...Thanks
Chris
Got the wing! Everything but the wing mounts look awesome. The fiberglass mounting plates are little wavy! But no worries, I will be removing them and making new one's that are spaced to 1210 mm.
Hey Kevin, I sent you a few e-mails. Fed Ex said that you recieved the damaged wing back. I have not heard back from you about shipping me a new one back.Anyone been in touch with Kevin?
Jim
Jim
yea right, good luck.
