TITO2

Anybody else interested on the bumper if so PM me asap.

jknapik

iTrader: (17)

just curiousto know about the lenses. How dark are they when we get them? arethey tinted a bit?like "smoked"?is it an option we can get???

BigWillieStyles

lets see some pictures!

Rotary4tw

iTrader: (3)

These lenses are pretty nice.

Unfort, that are not tinted, and are clear. Anybody who wants to tint these is going to have their work cut out for them. I have talked to two professional tint shops in my area, and both of them said that due to the shape of the cover, it would be very expensive and painful to tint.

Our three options were:

1) Niteshade (tinted rattlecan type spray) $13.00 a can, low chance of failure.
2) Lamin-x (Very hard to apply to this shape) $60.00 for the sheets, high chance of failure.
3) Traditional tint (Very hard to apply to this shape) $cheap for sheets, high chance of failure.

I'm currently planning on using the Niteshade for one set, and trying to make the yellow lamin-x work for the second. I'll post pictures of my progress when the products arrive.

JKL Racing Engineering

iTrader: (1)

Again, all the lenses are custom made by a professional glass manufacture for us. They are only offered in clear color, sorry.

Here are some pictures we got. We did not do any sanding or adjusting to improve the fitment. So this is what you will get for directly slapping on the bumper. All we had the body shop do is paint and clear coated the bumper when it was off the car. We then just slapped it on with some bolts. Please excuse the dirty car and any imperfections since we rushed this to get some pics taken for those who requested to see the final products. As you can also see, we just used double sided tape for the lense covers so it does not look very pretty. We will ask Mark (gnx7) to share some pics with us once his car is ready.

One suggestion for installation, it is recommended to use the stock mounting hardware for the fenders. The mounting hardwares are the metal plates with 3 threaded studs on each plate. The two plates can be found on any stock bumpers where it meets the fenders. The reason for this is the original GT-C bumper is designed to install with these hardwares. However, it is not required to use the hardwares since we did not use them for the setup in the pics below.

TITO2

Im trying to sell my bumper thats why I asked for any one that is interested in the bumper to pm me. The bumper is still at JKL has not shipped out to me yet and I have no use for it going another route, Iam asking what I payed for it $600+$160shipping=$760, it would be alot easyer since shipping is payed for and ready to ship out, who ever is interested would just have to pay-pal me the amount of $760 and send me your address so that it can be shipped out to you.

damian

iTrader: (2)

Here are some pics of the bumper going on my race car.

Prototype test fitting:


Here it is painted and installed:





The fitment to the hood line, fenders, and light covers was very good.

Please be patient with me as I am very busy with work and the race season, but I am working on getting the following to JKL to work on:

1) canards
2) oil cooler/brake ducting
3) new rebar
4) splitter/undertray

Tim Benton

iTrader: (1)

If it's race season, there better be some new videos on the website...and soon. That or the next installment of the light saberduels. Maybe one where someone loses a limb.

Tim

damian

iTrader: (2)

heheh, the videos will keep coming, im still behind on those also, I have a big 2007 nasa racing season summary video planned and still have hours and hours of footage from when Andy and I did the 1 lap a few years back.

I need a clone to be dedicated to just video editing lol

JKL Racing Engineering

iTrader: (1)

Damian, looks good! Just remembered, you need lense covers? We did not send you a pair since they were not done when we sent you the sample unit. Let us know if you need a set. Keep the good stuff coming!

BigWillieStyles

OMG that looks really great quality! Awesome stuff, will the Mazdaspeed covers fit original bumpers?

BNA_ELLIS

Wish you guy's would ship my bumper with Bax Global and let me fit that bad boy to my car


rgds
Brian

JKL Racing Engineering

iTrader: (1)

BigWillieStyles, do you mean by using our replica lense covers on original GT-C bumpers? If so, yeah, it should work since we used original lense covers as the mold to make our lense covers.

BNA_ELLIS, we contacted Bax Global already and just waiting for their quote now. Sorry for the delay. Thanks!

gnx7

iTrader: (10)

That looks good Damian!

JKL-
What is the process and best way for fitting/installing the lense covers?

I need a set of the '99 replica lights also. My car will be in primer finally this week. Good God is my bodyshop slow.... but does good work. The guy had the ***** to take a 4 day vacation .

My car will be running stock front fenders with hand rolled lips for max clearance. Pettit rear flares and a JKL GTC style front bumper. I didn't really like the way the Shine Burnout front flared fenders looked on the car. (anybody interested in them PM me)

JKL Racing Engineering

iTrader: (1)

mark, for the lense cover install, really nothing special here, just line up the covers first to see if all the holes match. If one or two holes are off by a little bit, try to push them around to see if you can get them to match. If not, modify the holes on the bumper to match the holes on the lense covers. For best fitment, also add some clear color double sided tape. For the bottom holes of the lense covers, they reach all the way into the oil cooler openings, so it is a bit difficult to drill holes there. You can just use double sided tape, be sure to use the strong ones there, color won't matter since you won't be able to see that part anyways. Just make sure everything will fit properly before you have the bumper painted since modifications, including drilling, applied after the paint is done might damage the paint in that area.

If you need the replica signals, sure, just send us the payment or if you need more details, just email us!

For everyone who already sent in your deposit but have not yet paid in full, we already sent out a message to each of you requesting for the remaining payment for the bumper. Please let us know your current status! Thanks!

Update:
For those who is sending in payments for signals, we will be using air shipping directly from Japan, so you will need to add $50 for shipping. This is only an estimate, if the actually cost appears to have a significant difference, we will quote you the additional or refund you the extra as needed. Thank you!

We are going to offer a flat shipping rate for convenience and you can decide on if you want to wait for other parts to be completed for combined shipping. We will see if Damian's rebar can fit in the same box with the bumper, if so, then shipping for rebar will be free for those who purchase our bumper. Splitter will have to be shipped in another box and shipping cost will be additional.

US Domestic Shipping Price on bumper only or bumper w/ signals shipments:$160

For those of you sending in the remaining payment for bumper only purchases, the amount due is $600 + $160 shipping = $760 - $200 deposit = $560 (Please use e-check so we can save some fees since we are not charging anyone for paypal fee for this GB. Thanks!)

Parallel Racing Dual Oil Cooler Kit:
1.
2.
3.
4.
5.


Damian's Rebar:
1. hifd (David)
2. calculon (ryan)
3. gnx7
4. sk8erpunk1983
5. PeeTee
6. ReadyKW
7. the RJ package
8. kao393
9. TITO2
10. Trout2 (John)
11. jknapik (Jacob)
12.
13.
14.


Damian's Splitter:
1. BigIslandSevens (Dave)
2. hifd (David)
3. calculon (ryan)
4. gnx7
5. sk8erpunk1983
6. PeeTee
7. ReadyKW
8. the RJ package
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.



First Batch:
1. Adax (Alan) - deposit received
2. theRJpackage (Ryan) - Full Payment Received: $760
3. TITO2 (Jesse) - Full Payment Received: $760
4. sk8erpunk1983 (Jesse) - Payment Received: $600
5. calculon (ryan) - (Shipped on 06-23-2008)

Second Batch:
6. demkog (greg) - (Shipped on 06-17-2008)
7. kao393 (Hsia) - deposit received
8. HiFD (David) - Full Payment Received: $760
9. gnx7 (Mark) - (Picked Up)
10. Mr_Scrapps - deposit received

Third Batch:
11. PeeTee (Paul) - deposit received
12. BigIslandSevens (David) - deposit received
13. bigblockquad - deposit received
14. BNA_ELLIS (Brian) - Payment Received: $760
15. Bob H (Bob) - deposit received

Fourth Batch:
16. Trout2 (John) - Full Payment Received: $760
17. Svelte_7 (Daniel) - deposit received
18. jknapik (Jacob) - deposit received


Waiting List:
18. D4rw1n (Jason)
19. jojodotcom (Joseph)
20. rx7__newbie
21. TypeFD (Dion)
22. OkiFD
23. Stonewall7
24. Giampiero
25. BoostedFd3s
26. darksideperformance
27. jic
28. ReadyKW


Lense Cover Only:
1. Rotary4tw (Ben) (2X) (Shipped on 06-23-2008)


OEM 99 Spec Signals & KS Harness $330 + shipping (KS Harness Only: $51.33 shipped including Paypal)
1. theRJpackage
2. julian - KS Harness only (2) (Shipped)
3. TITO2 (Jesse) Full Payment Received: $380
4. ReadyKW (Jesse) Full Payment Received: $390
5. Trout2 (John) Full Payment Received: $380
6. stubba (Steve) - KS Harness only (2) (Shipped)
7. jknapik (Jacob) Full Payment Received: $380
8.

Replica 99 Spec Signals $200 + shipping
1. adax (Alan)
2. gnx7 (Mark)
3. hifd (David) Payment Received: $219
4. TypeFD
5. PeeTee
6. Mr_Scrapps
7. kao393
8. stubba (Steve) (Shipped)
9.

damian

iTrader: (2)

Anther pic further along, I still need to get lenses on it :-)

JKL Racing Engineering

iTrader: (1)

For everyone who already sent in your deposit but have not yet paid in full, we already sent out a message to each of you requesting for the remaining payment for the bumper. Please let us know your current status! Thanks!

Update:
For those who is sending in payments for signals, we will be using air shipping directly from Japan, so you will need to add $50 for shipping. This is only an estimate, if the actually cost appears to have a significant difference, we will quote you the additional or refund you the extra as needed. Thank you!

We are going to offer a flat shipping rate for convenience and you can decide on if you want to wait for other parts to be completed for combined shipping. We will see if Damian's rebar can fit in the same box with the bumper, if so, then shipping for rebar will be free for those who purchase our bumper. Splitter will have to be shipped in another box and shipping cost will be additional.

US Domestic Shipping Price on bumper only or bumper w/ signals shipments:$160

For those of you sending in the remaining payment for bumper only purchases, the amount due is $600 + $160 shipping = $760 - $200 deposit = $560 (Please use e-check so we can save some fees since we are not charging anyone for paypal fee for this GB. Thanks!)

Parallel Racing Dual Oil Cooler Kit:
1.
2.
3.
4.
5.


Damian's Rebar:
1. hifd (David)
2. calculon (ryan)
3. gnx7
4. sk8erpunk1983
5. PeeTee
6. ReadyKW
7. the RJ package
8. kao393
9. TITO2
10. Trout2 (John)
11. jknapik (Jacob)
12.
13.
14.


Damian's Splitter:
1. BigIslandSevens (Dave)
2. hifd (David)
3. calculon (ryan)
4. gnx7
5. sk8erpunk1983
6. PeeTee
7. ReadyKW
8. the RJ package
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.



First Batch:
1. Adax (Alan) - deposit received
2. theRJpackage (Ryan) - Full Payment Received: $760
3. TITO2 (Jesse) - Full Payment Received: $760
4. sk8erpunk1983 (Jesse) - Payment Received: $600
5. calculon (ryan) - (Shipped on 06-23-2008)

Second Batch:
6. demkog (greg) - (Shipped on 06-17-2008)
7. kao393 (Hsia) - deposit received
8. HiFD (David) - Full Payment Received: $760
9. gnx7 (Mark) - (Picked Up)
10. Mr_Scrapps - deposit received

Third Batch:
11. PeeTee (Paul) - deposit received
12. BigIslandSevens (David) - deposit received
13. bigblockquad - deposit received
14. BNA_ELLIS (Brian) - (Shipped on 07-18-2008)
15. Bob H (Bob) - deposit received

Fourth Batch:
16. Trout2 (John) - Full Payment Received: $760
17. Svelte_7 (Daniel) - (Picked Up)
18. jknapik (Jacob) - deposit received


Waiting List:
18. D4rw1n (Jason)
19. jojodotcom (Joseph)
20. rx7__newbie
21. TypeFD (Dion)
22. OkiFD
23. Stonewall7
24. Giampiero
25. BoostedFd3s
26. darksideperformance
27. jic
28. ReadyKW


Lense Cover Only:
1. Rotary4tw (Ben) (2X) (Shipped on 06-23-2008)


OEM 99 Spec Signals & KS Harness $330 + shipping (KS Harness Only: $51.33 shipped including Paypal)
1. theRJpackage
2. julian - KS Harness only (2) (Shipped)
3. TITO2 (Jesse) Full Payment Received: $380
4. ReadyKW (Jesse) Full Payment Received: $390
5. Trout2 (John) Full Payment Received: $380
6. stubba (Steve) - KS Harness only (2) (Shipped)
7. jknapik (Jacob) Full Payment Received: $380
8.

Replica 99 Spec Signals $200 + shipping
1. adax (Alan)
2. gnx7 (Mark)
3. hifd (David) Payment Received: $219
4. TypeFD
5. PeeTee
6. Mr_Scrapps
7. kao393
8. stubba (Steve) (Shipped)
9.

damian

iTrader: (2)

More pics of the nose from this past testing/race weekend:

damian

iTrader: (2)

Update on the other parts:

I have another race to prep for at Road America in a few weeks and we are tryin to get the new t5 trans in, so I will be tied up with that for a while. But after I get past that I can get back on the rebar/ducting/canards development. I will also get a splitter over to JKL soon so they can keep working on that.

RockLobster

iTrader: (7)

And, he didnt skatter it there either. WIN!

damian

iTrader: (2)

:-)

JKL Racing Engineering

iTrader: (1)

For everyone who already sent in your deposit but have not yet paid in full, we already sent out a message to each of you requesting for the remaining payment for the bumper. Please let us know your current status! Thanks!

Update:
For those who is sending in payments for signals, we will be using air shipping directly from Japan, so you will need to add $50 for shipping. This is only an estimate, if the actually cost appears to have a significant difference, we will quote you the additional or refund you the extra as needed. Thank you!

We are going to offer a flat shipping rate for convenience and you can decide on if you want to wait for other parts to be completed for combined shipping. We will see if Damian's rebar can fit in the same box with the bumper, if so, then shipping for rebar will be free for those who purchase our bumper. Splitter will have to be shipped in another box and shipping cost will be additional.

US Domestic Shipping Price on bumper only or bumper w/ signals shipments:$160

For those of you sending in the remaining payment for bumper only purchases, the amount due is $600 + $160 shipping = $760 - $200 deposit = $560 (Please use e-check so we can save some fees since we are not charging anyone for paypal fee for this GB. Thanks!)

Parallel Racing Dual Oil Cooler Kit:
1.
2.
3.
4.
5.


Damian's Rebar:
1. hifd (David)
2. calculon (ryan)
3. gnx7
4. sk8erpunk1983
5. PeeTee
6. ReadyKW
7. the RJ package
8. kao393
9. TITO2
10. Trout2 (John)
11. jknapik (Jacob)
12.
13.
14.


Damian's Splitter:
1. BigIslandSevens (Dave)
2. hifd (David)
3. calculon (ryan)
4. gnx7
5. sk8erpunk1983
6. PeeTee
7. ReadyKW
8. the RJ package
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.



First Batch:
1. Adax (Alan) - deposit received
2. theRJpackage (Ryan) - Full Payment Received: $760
3. TITO2 (Jesse) - Full Payment Received: $760
4. sk8erpunk1983 (Jesse) - Payment Received: $600
5. calculon (ryan) - (Shipped on 06-23-2008)

Second Batch:
6. demkog (greg) - (Shipped on 06-17-2008)
7. kao393 (Hsia) - deposit received
8. HiFD (David) - Full Payment Received: $760
9. gnx7 (Mark) - (Picked Up)
10. Mr_Scrapps - deposit received

Third Batch:
11. PeeTee (Paul) - deposit received
12. BigIslandSevens (David) - deposit received
13. bigblockquad - deposit received
14. BNA_ELLIS (Brian) - (Shipped on 07-18-2008)
15. Bob H (Bob) - (Shipped on 07-28-2008)

Fourth Batch:
16. Trout2 (John) - Full Payment Received: $760
17. Svelte_7 (Daniel) - (Picked Up)
18. jknapik (Jacob) - deposit received


Waiting List:
18. D4rw1n (Jason)
19. jojodotcom (Joseph)
20. rx7__newbie
21. TypeFD (Dion)
22. OkiFD
23. Stonewall7
24. Giampiero
25. BoostedFd3s
26. darksideperformance
27. jic
28. ReadyKW


Lense Cover Only:
1. Rotary4tw (Ben) (2X) (Shipped on 06-23-2008)


OEM 99 Spec Signals & KS Harness $330 + shipping (KS Harness Only: $51.33 shipped including Paypal)
1. theRJpackage
2. julian - KS Harness only (2) (Shipped)
3. TITO2 (Jesse) Full Payment Received: $380
4. ReadyKW (Jesse) (Shipped on 07-28-2008)
5. Trout2 (John) Full Payment Received: $380
6. stubba (Steve) - KS Harness only (2) (Shipped)
7. jknapik (Jacob) Full Payment Received: $380
8.

Replica 99 Spec Signals $200 + shipping
1. adax (Alan)
2. gnx7 (Mark)
3. hifd (David) Payment Received: $219
4. TypeFD
5. PeeTee
6. Mr_Scrapps
7. kao393
8. stubba (Steve) (Shipped)
9.

Prometheus

iTrader: (2)

I just took a look at your website.

It looks like you are marketing the splitter for the GTC bumper. (I assume a pre-order option on the online store)

http://shop.jklre.com/products/fd-gtc-rfb

The Splitter was available as an accessory for the race bumper.

The asking retail price was $330.00 USD (a little steep at first glance) with little information up on it. (hopefully a little cheaper through the GB option)

What I'm wondering is for that price will it come with the mounting clips as seen on Damian's Splitter?



Oh yeah how is the re-bar coming along

Thanks a lot!

~Jesse

JKL Racing Engineering

iTrader: (1)

The price on the website is just the retail price and forum GB price is always better than that.

The price will be $250-280 for the FRP splitter depending on how many order we actually get since we cannot just assume everyone on the interest list will order.

For the hardware, yes, of course. All hardwares will be included with the splitter.

For the rebar, we have not yet gotten any firm updates from Damian. So we hope we will hear from him soon. He has been busy lately with his race events.

damian

iTrader: (2)

>>For the rebar, we have not yet gotten any firm updates from Damian. So we hope we will hear from him soon. He has been busy lately with his race events.


yeah its gona be a while on the rebar and ducting, but ill get to it when i can.