GB: FD Mazdaspeed Replica GT-Concept Front Bumper in Flexible FRP
#303
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: SF
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Update:
For those who is sending in payments for signals, we will be using air shipping directly from Japan, so you will need to add $50 for shipping. This is only an estimate, if the actually cost appears to have a significant difference, we will quote you the additional or refund you the extra as needed. Thank you!
We are going to offer a flat shipping rate for convenience and you can decide on if you want to wait for other parts to be completed for combined shipping. We will see if Damian's rebar can fit in the same box with the bumper, if so, then shipping for rebar will be free for those who purchase our bumper. Splitter will have to be shipped in another box and shipping cost will be additional.
US Domestic Shipping Price on bumper only or bumper w/ signals shipments:$160
For those of you sending in the remaining payment for bumper only purchases, the amount due is $600 + $160 shipping = $760 - $200 deposit = $560 (Please use e-check so we can save some fees since we are not charging anyone for paypal fee for this GB. Thanks!)
Parallel Racing Dual Oil Cooler Kit:
1.
2.
3.
4.
5.
Damian's Rebar:
1. hifd (David)
2. calculon (ryan)
3. gnx7
4. sk8erpunk1983
5. PeeTee
6. ReadyKW
7. the RJ package
8. kao393
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.
Damian's Splitter:
1. BigIslandSevens (Dave)
2. hifd (David)
3. calculon (ryan)
4. gnx7
5. sk8erpunk1983
6. PeeTee
7. ReadyKW
8. the RJ package
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.
First Batch:
1. Adax (Alan) - deposit received
2. theRJpackage (Ryan) - Full Payment Received: $760
3. TITO2 (Jesse) - Full Payment Received: $760
4. sk8erpunk1983 (Jesse) - Payment Received: $600
5. calculon (ryan) - Full Payment Received: $760
Second Batch:
6. demkog (greg) - (Shipped on 06-17-2008)
7. kao393 (Hsia) - deposit received
8. HiFD (David) - Full Payment Received: $760
9. gnx7 (Mark) - deposit received
10. Mr_Scrapps - deposit received
Third Batch:
11. PeeTee (Paul) - deposit received
12. BigIslandSevens (David) - deposit received
13. bigblockquad - deposit received
14. BNA_ELLIS (Brian) - Payment Received: $760
15. Bob H (Bob) - deposit received
Fourth Batch:
16. Trout2 (John) - Full Payment Received: $760
17. Svelte_7 (Daniel) - deposit received
Waiting List:
18. D4rw1n (Jason)
19. jojodotcom (Joseph)
20. rx7__newbie
21. TypeFD (Dion)
22. OkiFD
23. Stonewall7
24. Giampiero
25. BoostedFd3s
26. darksideperformance
27. jic
28. ReadyKW
Lense Cover Only:
1. Rotary4tw (Ben) (2X) (Full Payment Received: $200)
OEM 99 Spec Signals & KS Harness $330 + shipping (KS Harness Only: $51.33 shipped including Paypal)
1. theRJpackage
2. julian - KS Harness only (2) (Full Payment Received)
3. TITO2 (Jesse) Full Payment Received: $380
4. ReadyKW (Jesse) Full Payment Received: $390
5. Trout2 (John) Full Payment Received: $380
6. stubba (Steve) - KS Harness only (2) (Full Payment Received)
7.
8.
Replica 99 Spec Signals $200 + shipping
1. adax (Alan)
2. gnx7 (Mark)
3. hifd (David) Payment Received: $219
4. TypeFD
5. PeeTee
6. Mr_Scrapps
7. kao393
8. stubba (Steve) Payment Received: $200
9.
For those who is sending in payments for signals, we will be using air shipping directly from Japan, so you will need to add $50 for shipping. This is only an estimate, if the actually cost appears to have a significant difference, we will quote you the additional or refund you the extra as needed. Thank you!
We are going to offer a flat shipping rate for convenience and you can decide on if you want to wait for other parts to be completed for combined shipping. We will see if Damian's rebar can fit in the same box with the bumper, if so, then shipping for rebar will be free for those who purchase our bumper. Splitter will have to be shipped in another box and shipping cost will be additional.
US Domestic Shipping Price on bumper only or bumper w/ signals shipments:$160
For those of you sending in the remaining payment for bumper only purchases, the amount due is $600 + $160 shipping = $760 - $200 deposit = $560 (Please use e-check so we can save some fees since we are not charging anyone for paypal fee for this GB. Thanks!)
Parallel Racing Dual Oil Cooler Kit:
1.
2.
3.
4.
5.
Damian's Rebar:
1. hifd (David)
2. calculon (ryan)
3. gnx7
4. sk8erpunk1983
5. PeeTee
6. ReadyKW
7. the RJ package
8. kao393
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.
Damian's Splitter:
1. BigIslandSevens (Dave)
2. hifd (David)
3. calculon (ryan)
4. gnx7
5. sk8erpunk1983
6. PeeTee
7. ReadyKW
8. the RJ package
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.
First Batch:
1. Adax (Alan) - deposit received
2. theRJpackage (Ryan) - Full Payment Received: $760
3. TITO2 (Jesse) - Full Payment Received: $760
4. sk8erpunk1983 (Jesse) - Payment Received: $600
5. calculon (ryan) - Full Payment Received: $760
Second Batch:
6. demkog (greg) - (Shipped on 06-17-2008)
7. kao393 (Hsia) - deposit received
8. HiFD (David) - Full Payment Received: $760
9. gnx7 (Mark) - deposit received
10. Mr_Scrapps - deposit received
Third Batch:
11. PeeTee (Paul) - deposit received
12. BigIslandSevens (David) - deposit received
13. bigblockquad - deposit received
14. BNA_ELLIS (Brian) - Payment Received: $760
15. Bob H (Bob) - deposit received
Fourth Batch:
16. Trout2 (John) - Full Payment Received: $760
17. Svelte_7 (Daniel) - deposit received
Waiting List:
18. D4rw1n (Jason)
19. jojodotcom (Joseph)
20. rx7__newbie
21. TypeFD (Dion)
22. OkiFD
23. Stonewall7
24. Giampiero
25. BoostedFd3s
26. darksideperformance
27. jic
28. ReadyKW
Lense Cover Only:
1. Rotary4tw (Ben) (2X) (Full Payment Received: $200)
OEM 99 Spec Signals & KS Harness $330 + shipping (KS Harness Only: $51.33 shipped including Paypal)
1. theRJpackage
2. julian - KS Harness only (2) (Full Payment Received)
3. TITO2 (Jesse) Full Payment Received: $380
4. ReadyKW (Jesse) Full Payment Received: $390
5. Trout2 (John) Full Payment Received: $380
6. stubba (Steve) - KS Harness only (2) (Full Payment Received)
7.
8.
Replica 99 Spec Signals $200 + shipping
1. adax (Alan)
2. gnx7 (Mark)
3. hifd (David) Payment Received: $219
4. TypeFD
5. PeeTee
6. Mr_Scrapps
7. kao393
8. stubba (Steve) Payment Received: $200
9.
#305
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: SF
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Update:
For those who is sending in payments for signals, we will be using air shipping directly from Japan, so you will need to add $50 for shipping. This is only an estimate, if the actually cost appears to have a significant difference, we will quote you the additional or refund you the extra as needed. Thank you!
We are going to offer a flat shipping rate for convenience and you can decide on if you want to wait for other parts to be completed for combined shipping. We will see if Damian's rebar can fit in the same box with the bumper, if so, then shipping for rebar will be free for those who purchase our bumper. Splitter will have to be shipped in another box and shipping cost will be additional.
US Domestic Shipping Price on bumper only or bumper w/ signals shipments:$160
For those of you sending in the remaining payment for bumper only purchases, the amount due is $600 + $160 shipping = $760 - $200 deposit = $560 (Please use e-check so we can save some fees since we are not charging anyone for paypal fee for this GB. Thanks!)
Parallel Racing Dual Oil Cooler Kit:
1.
2.
3.
4.
5.
Damian's Rebar:
1. hifd (David)
2. calculon (ryan)
3. gnx7
4. sk8erpunk1983
5. PeeTee
6. ReadyKW
7. the RJ package
8. kao393
9. TITO2
10. Trout2 (John)
11. jknapik (Jacob)
12.
13.
14.
Damian's Splitter:
1. BigIslandSevens (Dave)
2. hifd (David)
3. calculon (ryan)
4. gnx7
5. sk8erpunk1983
6. PeeTee
7. ReadyKW
8. the RJ package
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.
First Batch:
1. Adax (Alan) - deposit received
2. theRJpackage (Ryan) - Full Payment Received: $760
3. TITO2 (Jesse) - Full Payment Received: $760
4. sk8erpunk1983 (Jesse) - Payment Received: $600
5. calculon (ryan) - Full Payment Received: $760
Second Batch:
6. demkog (greg) - (Shipped on 06-17-2008)
7. kao393 (Hsia) - deposit received
8. HiFD (David) - Full Payment Received: $760
9. gnx7 (Mark) - deposit received
10. Mr_Scrapps - deposit received
Third Batch:
11. PeeTee (Paul) - deposit received
12. BigIslandSevens (David) - deposit received
13. bigblockquad - deposit received
14. BNA_ELLIS (Brian) - Payment Received: $760
15. Bob H (Bob) - deposit received
Fourth Batch:
16. Trout2 (John) - Full Payment Received: $760
17. Svelte_7 (Daniel) - deposit received
18. jknapik (Jacob) - deposit received
Waiting List:
18. D4rw1n (Jason)
19. jojodotcom (Joseph)
20. rx7__newbie
21. TypeFD (Dion)
22. OkiFD
23. Stonewall7
24. Giampiero
25. BoostedFd3s
26. darksideperformance
27. jic
28. ReadyKW
Lense Cover Only:
1. Rotary4tw (Ben) (2X) (Full Payment Received: $200)
OEM 99 Spec Signals & KS Harness $330 + shipping (KS Harness Only: $51.33 shipped including Paypal)
1. theRJpackage
2. julian - KS Harness only (2) (Full Payment Received)
3. TITO2 (Jesse) Full Payment Received: $380
4. ReadyKW (Jesse) Full Payment Received: $390
5. Trout2 (John) Full Payment Received: $380
6. stubba (Steve) - KS Harness only (2) (Full Payment Received)
7. jknapik (Jacob) Full Payment Received: $380
8.
Replica 99 Spec Signals $200 + shipping
1. adax (Alan)
2. gnx7 (Mark)
3. hifd (David) Payment Received: $219
4. TypeFD
5. PeeTee
6. Mr_Scrapps
7. kao393
8. stubba (Steve) Payment Received: $200
9.
Last edited by JKL Racing Engineering; 06-18-08 at 11:23 AM.
#310
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: SF
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
As we stated earlier last week, the bumper is ready to ship. We already asked for remaining payments and shipping requests to be sent to us when the buyer is ready. Please see post #297. Thanks!
#311
Senior Member
iTrader: (10)
Join Date: Oct 2002
Location: Greensboro, NC
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Since you now have the final bumper product - can those of us waiting for a picture of the final product see one? Specifically, can you point out the areas where you added more and where we will likely have to remove material for fitment. I don't mind waiting until you get the lenses in to take a picture of them together.
With those pictures, the rest of my pmt will be sent.
Thanks,
Bob
With those pictures, the rest of my pmt will be sent.
Thanks,
Bob
#313
MMR SpeedFactory
iTrader: (17)
Join Date: May 2008
Location: Montreal, Canada
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
il pay the rest of the quota for the bumper and will give you information on the shipping address. Also il wait for the harness to come with the lights and lenses to reduce multiple shipping, i mean they should all fit in the same box with the bumper so it should be perfect, like a "kit". thanks again
#315
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: SF
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Sure, we will post some pics as soon as they are available.
Yes, lense covers and lights can fit in the bumper box.
Damian is pretty much done with the splitter and he is working on the rebar and ducts. Damian is also looking at some canards design so we will possibly make some canards too.
Yes, lense covers and lights can fit in the bumper box.
Damian is pretty much done with the splitter and he is working on the rebar and ducts. Damian is also looking at some canards design so we will possibly make some canards too.
#316
Full Member
iTrader: (2)
Join Date: Dec 2006
Location: connecticut
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Recived the bumper Yesterday!
Over all happy with the bumper. packing was a bit scarse for UPS, bumper corners were threw the box, and the spots that the box and bummper were tuching rubbed threw the gel coat.
The bumper looks real nice except that the gel coat is thin not a big deal going to paint it. I have had FRP pices I could buff and run before and the screen in the grill is cheep not a big deal not plan on using it.
I hven't put too much work into it but it may seem that the leans cover hols are a bit off but that could just be me.
I have not had a chance to fit the bumper and hope that is what will put this above the other companies products.
Over all happy with the bumper. packing was a bit scarse for UPS, bumper corners were threw the box, and the spots that the box and bummper were tuching rubbed threw the gel coat.
The bumper looks real nice except that the gel coat is thin not a big deal going to paint it. I have had FRP pices I could buff and run before and the screen in the grill is cheep not a big deal not plan on using it.
I hven't put too much work into it but it may seem that the leans cover hols are a bit off but that could just be me.
I have not had a chance to fit the bumper and hope that is what will put this above the other companies products.
#318
DragonFly
iTrader: (2)
A few notes ans some replies:
>>I hven't put too much work into it but it may seem that the leans cover hols are a bit off but that could just be me.
I though the same thing, but then just pushed on them a bit and the 'poped' into place and fit very well. Keep in mind I have the first prototype nose that was made, but I do not think that area changed at all to the final mold. Get the one side of the lense in first, then just pop it in there.
>>Damian- any pics to share of the splitter thus far?
I do have pics of my nose installed with one of my splitter/undertrays on so you can see what it looks like. But, I left my camera at the garage :-( I will try to pick it up later this week, if not I will be there on the weekend again.
I have to ship a splitter/untertray over to Kevin still so we can go through some details. Then they should be good to go.
>>I hven't put too much work into it but it may seem that the leans cover hols are a bit off but that could just be me.
I though the same thing, but then just pushed on them a bit and the 'poped' into place and fit very well. Keep in mind I have the first prototype nose that was made, but I do not think that area changed at all to the final mold. Get the one side of the lense in first, then just pop it in there.
>>Damian- any pics to share of the splitter thus far?
I do have pics of my nose installed with one of my splitter/undertrays on so you can see what it looks like. But, I left my camera at the garage :-( I will try to pick it up later this week, if not I will be there on the weekend again.
I have to ship a splitter/untertray over to Kevin still so we can go through some details. Then they should be good to go.
#321
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: SF
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Yep, they are on their way to us from Japan. So they should be somewhere mid-air flying across the pacific now
We will post once the shipment arrives.
For the problem regarding the lense holes not matching perfectly, first, we did not change anything there so Damian's suggestions should still work. Second, please remember that these lense covers and bumpers have pre-drilled holes and all drilled by hand so there will be some slight mis-matching for certain individual units. All you have to do is play around with it or just simply make the hole a little longer with a drill for easy fitting.
Once we receive the splitter from Damian, we will get it over to the factory asap and start the production. Thanks again to Damian for all his hard work in making everything possible for the rotary community!
We will post once the shipment arrives.
For the problem regarding the lense holes not matching perfectly, first, we did not change anything there so Damian's suggestions should still work. Second, please remember that these lense covers and bumpers have pre-drilled holes and all drilled by hand so there will be some slight mis-matching for certain individual units. All you have to do is play around with it or just simply make the hole a little longer with a drill for easy fitting.
Once we receive the splitter from Damian, we will get it over to the factory asap and start the production. Thanks again to Damian for all his hard work in making everything possible for the rotary community!
#323
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: SF
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
The signals just arrived today from Japan. So we are ready to ship for those who purchased signals. Thanks!
Update:
For those who is sending in payments for signals, we will be using air shipping directly from Japan, so you will need to add $50 for shipping. This is only an estimate, if the actually cost appears to have a significant difference, we will quote you the additional or refund you the extra as needed. Thank you!
We are going to offer a flat shipping rate for convenience and you can decide on if you want to wait for other parts to be completed for combined shipping. We will see if Damian's rebar can fit in the same box with the bumper, if so, then shipping for rebar will be free for those who purchase our bumper. Splitter will have to be shipped in another box and shipping cost will be additional.
US Domestic Shipping Price on bumper only or bumper w/ signals shipments:$160
For those of you sending in the remaining payment for bumper only purchases, the amount due is $600 + $160 shipping = $760 - $200 deposit = $560 (Please use e-check so we can save some fees since we are not charging anyone for paypal fee for this GB. Thanks!)
Parallel Racing Dual Oil Cooler Kit:
1.
2.
3.
4.
5.
Damian's Rebar:
1. hifd (David)
2. calculon (ryan)
3. gnx7
4. sk8erpunk1983
5. PeeTee
6. ReadyKW
7. the RJ package
8. kao393
9. TITO2
10. Trout2 (John)
11. jknapik (Jacob)
12.
13.
14.
Damian's Splitter:
1. BigIslandSevens (Dave)
2. hifd (David)
3. calculon (ryan)
4. gnx7
5. sk8erpunk1983
6. PeeTee
7. ReadyKW
8. the RJ package
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.
First Batch:
1. Adax (Alan) - deposit received
2. theRJpackage (Ryan) - Full Payment Received: $760
3. TITO2 (Jesse) - Full Payment Received: $760
4. sk8erpunk1983 (Jesse) - Payment Received: $600
5. calculon (ryan) - (Shipped on 06-23-2008)
Second Batch:
6. demkog (greg) - (Shipped on 06-17-2008)
7. kao393 (Hsia) - deposit received
8. HiFD (David) - Full Payment Received: $760
9. gnx7 (Mark) - (Picked Up)
10. Mr_Scrapps - deposit received
Third Batch:
11. PeeTee (Paul) - deposit received
12. BigIslandSevens (David) - deposit received
13. bigblockquad - deposit received
14. BNA_ELLIS (Brian) - Payment Received: $760
15. Bob H (Bob) - deposit received
Fourth Batch:
16. Trout2 (John) - Full Payment Received: $760
17. Svelte_7 (Daniel) - deposit received
18. jknapik (Jacob) - deposit received
Waiting List:
18. D4rw1n (Jason)
19. jojodotcom (Joseph)
20. rx7__newbie
21. TypeFD (Dion)
22. OkiFD
23. Stonewall7
24. Giampiero
25. BoostedFd3s
26. darksideperformance
27. jic
28. ReadyKW
Lense Cover Only:
1. Rotary4tw (Ben) (2X) (Shipped on 06-23-2008)
OEM 99 Spec Signals & KS Harness $330 + shipping (KS Harness Only: $51.33 shipped including Paypal)
1. theRJpackage
2. julian - KS Harness only (2) (Full Payment Received)
3. TITO2 (Jesse) Full Payment Received: $380
4. ReadyKW (Jesse) Full Payment Received: $390
5. Trout2 (John) Full Payment Received: $380
6. stubba (Steve) - KS Harness only (2) (Full Payment Received)
7. jknapik (Jacob) Full Payment Received: $380
8.
Replica 99 Spec Signals $200 + shipping
1. adax (Alan)
2. gnx7 (Mark)
3. hifd (David) Payment Received: $219
4. TypeFD
5. PeeTee
6. Mr_Scrapps
7. kao393
8. stubba (Steve) Payment Received: $200
9.
Update:
For those who is sending in payments for signals, we will be using air shipping directly from Japan, so you will need to add $50 for shipping. This is only an estimate, if the actually cost appears to have a significant difference, we will quote you the additional or refund you the extra as needed. Thank you!
We are going to offer a flat shipping rate for convenience and you can decide on if you want to wait for other parts to be completed for combined shipping. We will see if Damian's rebar can fit in the same box with the bumper, if so, then shipping for rebar will be free for those who purchase our bumper. Splitter will have to be shipped in another box and shipping cost will be additional.
US Domestic Shipping Price on bumper only or bumper w/ signals shipments:$160
For those of you sending in the remaining payment for bumper only purchases, the amount due is $600 + $160 shipping = $760 - $200 deposit = $560 (Please use e-check so we can save some fees since we are not charging anyone for paypal fee for this GB. Thanks!)
Parallel Racing Dual Oil Cooler Kit:
1.
2.
3.
4.
5.
Damian's Rebar:
1. hifd (David)
2. calculon (ryan)
3. gnx7
4. sk8erpunk1983
5. PeeTee
6. ReadyKW
7. the RJ package
8. kao393
9. TITO2
10. Trout2 (John)
11. jknapik (Jacob)
12.
13.
14.
Damian's Splitter:
1. BigIslandSevens (Dave)
2. hifd (David)
3. calculon (ryan)
4. gnx7
5. sk8erpunk1983
6. PeeTee
7. ReadyKW
8. the RJ package
9. TITO2
10. Trout2 (John)
11.
12.
13.
14.
First Batch:
1. Adax (Alan) - deposit received
2. theRJpackage (Ryan) - Full Payment Received: $760
3. TITO2 (Jesse) - Full Payment Received: $760
4. sk8erpunk1983 (Jesse) - Payment Received: $600
5. calculon (ryan) - (Shipped on 06-23-2008)
Second Batch:
6. demkog (greg) - (Shipped on 06-17-2008)
7. kao393 (Hsia) - deposit received
8. HiFD (David) - Full Payment Received: $760
9. gnx7 (Mark) - (Picked Up)
10. Mr_Scrapps - deposit received
Third Batch:
11. PeeTee (Paul) - deposit received
12. BigIslandSevens (David) - deposit received
13. bigblockquad - deposit received
14. BNA_ELLIS (Brian) - Payment Received: $760
15. Bob H (Bob) - deposit received
Fourth Batch:
16. Trout2 (John) - Full Payment Received: $760
17. Svelte_7 (Daniel) - deposit received
18. jknapik (Jacob) - deposit received
Waiting List:
18. D4rw1n (Jason)
19. jojodotcom (Joseph)
20. rx7__newbie
21. TypeFD (Dion)
22. OkiFD
23. Stonewall7
24. Giampiero
25. BoostedFd3s
26. darksideperformance
27. jic
28. ReadyKW
Lense Cover Only:
1. Rotary4tw (Ben) (2X) (Shipped on 06-23-2008)
OEM 99 Spec Signals & KS Harness $330 + shipping (KS Harness Only: $51.33 shipped including Paypal)
1. theRJpackage
2. julian - KS Harness only (2) (Full Payment Received)
3. TITO2 (Jesse) Full Payment Received: $380
4. ReadyKW (Jesse) Full Payment Received: $390
5. Trout2 (John) Full Payment Received: $380
6. stubba (Steve) - KS Harness only (2) (Full Payment Received)
7. jknapik (Jacob) Full Payment Received: $380
8.
Replica 99 Spec Signals $200 + shipping
1. adax (Alan)
2. gnx7 (Mark)
3. hifd (David) Payment Received: $219
4. TypeFD
5. PeeTee
6. Mr_Scrapps
7. kao393
8. stubba (Steve) Payment Received: $200
9.
#324
Full Member
Join Date: May 2008
Location: Austin, Tx
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Would like to know shipping to Canada West Coast as well, but don't mind picking it up from the border.
List:
1. Adax (Alan) - deposit received
2. sk8erpunk1983 (Jesse)
3. Palsor1 (Andy)
4. Trout2 (Jack)
5. calculon (ryan)
6. TITO2 (Jesse) - deposit received
7. D4rw1n (Jason)
8. theRJpackage (Ryan) - deposit sent
9. jojodotcom (Joseph)
List:
1. Adax (Alan) - deposit received
2. sk8erpunk1983 (Jesse)
3. Palsor1 (Andy)
4. Trout2 (Jack)
5. calculon (ryan)
6. TITO2 (Jesse) - deposit received
7. D4rw1n (Jason)
8. theRJpackage (Ryan) - deposit sent
9. jojodotcom (Joseph)