thanks for all the helpful posts! JC Cosmo owner
#1
Junior Member
Thread Starter
thanks for all the helpful posts! JC Cosmo owner
Hey guys
Finally joined the forum, been lurking for years.
I have a 13B Eunos Cosmo with 29,000KM in pretty mint condition.
I am aiming for OEM+ - currently stock unopened motor and autobox with an EFR9174 turbo, Turblown cast stainless IWG manifold and an Adaptronic M2000 ECU. I have a few more bits to get to really stress its power on the dyno but it's currently 300rwhp@6000rpm at about 13psi through the very restrictive tiny stock intercooler. New intercooler should really bump that figure up.
Finally joined the forum, been lurking for years.
I have a 13B Eunos Cosmo with 29,000KM in pretty mint condition.
I am aiming for OEM+ - currently stock unopened motor and autobox with an EFR9174 turbo, Turblown cast stainless IWG manifold and an Adaptronic M2000 ECU. I have a few more bits to get to really stress its power on the dyno but it's currently 300rwhp@6000rpm at about 13psi through the very restrictive tiny stock intercooler. New intercooler should really bump that figure up.
The following users liked this post:
Akagis_white_comet (09-29-22)
The following users liked this post:
Grantius (09-30-22)
The following users liked this post:
Grantius (09-30-22)
#4
Hey...Cut it out!
iTrader: (4)
Welcome to the club. Sounds like you're fairly well-versed if you've already gone with a standalone plus a single turbo conversion. Since it's bound to come up sooner or later, this will help you solve anything else that comes up on the rest of the car.
Having the right tool for the job makes any job easier.
EDIT: Turns out I already know you from the Cosmo Owners Group, and you already have the Workshop Manual & Wiring Diagram book
Having the right tool for the job makes any job easier.
EDIT: Turns out I already know you from the Cosmo Owners Group, and you already have the Workshop Manual & Wiring Diagram book
Last edited by Akagis_white_comet; 09-29-22 at 09:33 AM. Reason: additional info
The following users liked this post:
Grantius (09-30-22)
#5
Junior Member
Thread Starter
Welcome to the club. Sounds like you're fairly well-versed if you've already gone with a standalone plus a single turbo conversion. Since it's bound to come up sooner or later, this will help you solve anything else that comes up on the rest of the car.
Having the right tool for the job makes any job easier.
EDIT: Turns out I already know you from the Cosmo Owners Group, and you already have the Workshop Manual & Wiring Diagram book
Having the right tool for the job makes any job easier.
EDIT: Turns out I already know you from the Cosmo Owners Group, and you already have the Workshop Manual & Wiring Diagram book
The following users liked this post:
Akagis_white_comet (09-30-22)
Thread
Thread Starter
Forum
Replies
Last Post