Introduce yourself New members post about yourself here...

New, With a strange FC

Thread Tools
 
Search this Thread
 
Old Jul 6, 2011 | 12:56 PM
  #1  
Brichey1's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2011
Posts: 45
Likes: 0
From: Florida
New, With a strange FC

I've admired FC's for a long time, And i got a chance to jump on one for 500.00 So I took the chance and did it,

However under the hood it's a little bit different.










never seen this kind of swap done before and it seems to make no sense since the 13b is faster, But I figured the car was worth the money in the shell alone.
Now all i'm left with is where to go from here.

I want to set my car up for drift, But the Volvo engine must go, I wanted some feedback from some other FC owners to see where i should go from here.

here's some pics of the body.





Reply
Old Jul 7, 2011 | 04:50 PM
  #2  
funkjaw's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (3)
 
Joined: Jul 2008
Posts: 2,515
Likes: 4
From: San Jose, CA (NorCal/S.F. Bay Area)
Wow WTFUDGE!! Why would they do that haha.

Anyways welcome to the club! Good luck with the car hope you figure out what you are going to do.
Reply
Old Jul 7, 2011 | 05:40 PM
  #3  
cmanns's Avatar
Smoke moar
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 2,530
Likes: 1
From: The yay, California
I had to login to the IB ruined 7 club to post for ya mate.

that swap is great. Sure it may have slightly less hp then the 13b but you'd beable to go 100's of thousands of miles just replacing oil, coolant, and timing belt.

Now go to a junkyard, grab turbo parts from a volvo with same engine. You should beable to pull entire volvo turbo engine + wiring and computers from a 740/940 turbo for under 200 at any jy in the US.

Apparently the bosch volvo computers are simple to setup in another car, just need power and connect to engine I guess.

Then you'll have an extremely reliable car, with over 400rwhp potential without worrying about apex seals.

You sir have bought a lucky car, how did they bolt the engine up?!
Reply
Old Jul 7, 2011 | 08:29 PM
  #4  
Mutaku's Avatar
I fix planes...
Tenured Member 15 Years
 
Joined: Jan 2004
Posts: 559
Likes: 0
From: Murica
I think I've seen a post about this swap somewhere.
Reply
Old Jul 7, 2011 | 08:52 PM
  #5  
Slobalt7's Avatar
Wrong wheel drive **D
 
Joined: Jul 2011
Posts: 67
Likes: 0
From: Hopeless Mills, NC
My jaw fell off, I saw the first pic and was like... Volvo slant 4? No, gotta be a Porsche 924... No that is a FC engine bay... Saw the second pic and was like.... WTF?!?!?!?!?!?!?!





HOLD ON, IT STILL HAS A/C?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!? !
Reply
Old Jul 8, 2011 | 10:50 AM
  #6  
Brichey1's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2011
Posts: 45
Likes: 0
From: Florida
Honestly I know nothing of the engine, It seems to have a lag when you hit the gas but i'm thinking its the carb since it's been sleeping for a while.
I did a little research on the engine, and it was a motor sport engine in the 80's It's running an auto trans, but my car was originally manual. Everywhere I go people have been like WTF?! I think I might swap back to 13b I'm still weighing my options.

It seems to have custom mounts made for the swap, everything has been wired correctly too, because my tach works. I'm still at a loss with what to do with it though.
Reply
Old Jul 10, 2011 | 11:32 PM
  #7  
bay2's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2005
Posts: 128
Likes: 0
From: north jersey
that is awesome, i'd buy it just for the quirk factor.

i'd seriously consider doing what cmanns suggested if you feel the itch for some power.

best first posting thread i've read in ages.

-bay
Reply
Old Jul 14, 2011 | 12:26 PM
  #8  
Initials JDM's Avatar
Can Post Only in New Member Section
 
Joined: Jul 2011
Posts: 1
Likes: 0
From: Boston Area
I seen SR 20 and LS1 swaps on RX7s but this is the most random! LOL
Reply
Old Jul 18, 2011 | 11:28 AM
  #9  
bay2's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2005
Posts: 128
Likes: 0
From: north jersey
i found this car posted on craigs list, that was a steal for such a unique car!

so have you done any more research on this? got some ideas of what you're going to do with it?
Reply
Old Jul 18, 2011 | 12:01 PM
  #10  
probaholic1's Avatar
Full Member
iTrader: (1)
 
Joined: Jun 2011
Posts: 157
Likes: 0
From: Palmdale
Honestly, that's pretty unique great price. I would do what's been said before and I would pick up the turbo parts for it from a junkyard. Because let's me honest the 13b is not the most reliable engine, and those volvo is petty much bullet proof
Reply
Old Jul 18, 2011 | 12:25 PM
  #11  
nazzy28's Avatar
Full Member
iTrader: (2)
 
Joined: Apr 2011
Posts: 62
Likes: 0
From: jacksonville
First picture I was like, "Oh someone swapped in a piston engine."

Second picture : "SCHHWWAAAAHH???!!! Volvo?!!"

lol

Anyways, I would keep it like that just for the "WTF" factor lol. But yeah, those actually are not bad engines. Like the other poster said, you could possibly find the turbo stuff for that in another car and throw it all in there. If I were you I'd definetly keep that the way it is.
Reply
Old Jul 18, 2011 | 12:30 PM
  #12  
RX12's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 10
Likes: 0
From: TEXAS
OMG...seems to be going backwards in the reliabilty dept...good find for $500.00
Reply
Old Jul 19, 2011 | 01:15 PM
  #13  
Brichey1's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2011
Posts: 45
Likes: 0
From: Florida
I'm considering a swap now, I'm starting school at UTI in a month, Basically whatever engine I can get my hands on and make tons of power, is what will be going in. I've since gutted the car, so theres currently nothing on the inside, I've done some carb adjustments as well. The engine is just so slow, I couldn't see myself keeping it. at best i'd say the engine is 100whp.
Reply
Old Jul 19, 2011 | 01:22 PM
  #14  
bay2's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2005
Posts: 128
Likes: 0
From: north jersey
keep all the volvo parts/mounts/etc and document it so you can sell the swap. heck, if i was closer i'd buy that from you in a heartbeat.
Reply
Old Jul 25, 2011 | 09:30 PM
  #15  
GregSL-SE's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2002
Posts: 287
Likes: 0
From: AL
WOW. I have never heard of this....
I agree with the quirky factor. The good news is you bought the rx7 with a volvo motor, not the other way around. welcome!
Reply
Old Jul 26, 2011 | 05:56 PM
  #16  
autocross_jake's Avatar
Can Post Only in New Member Section
 
Joined: Jul 2011
Posts: 2
Likes: 0
From: Lisle, IL
You weren't kidding when you said strange!
Reply
Old Jul 31, 2011 | 09:23 PM
  #17  
snerRX7's Avatar
N/A ALL DAY!!!
iTrader: (1)
 
Joined: Jul 2011
Posts: 65
Likes: 0
From: Stratford CT
WOW!!! seen a few swaps but Volvo??? at least its a good engine and a good find either way.. good luck
Reply
Old Aug 1, 2011 | 04:18 AM
  #18  
BenRX's Avatar
‘88 GTU
Tenured Member: 15 Years
Liked
 
Joined: Jun 2008
Posts: 250
Likes: 6
From: Denver CO
Interesting car, but its borderline sacrelige surely. I can understand LS swaps on FC's etc. Really though, in my opinion i'd only want a rotary lump under the hood.

How about sticking a RX8 renesis engine in there
Reply
Old Aug 1, 2011 | 04:49 AM
  #19  
ZumnRx8's Avatar
RX7 & RX8 *****
 
Joined: Aug 2010
Posts: 78
Likes: 0
From: So. California
Wtf lol
Reply
Old Aug 1, 2011 | 09:34 AM
  #20  
Rx7_fanofspeed's Avatar
Original Blackfuries Plyr
 
Joined: May 2011
Posts: 91
Likes: 0
From: Seattle WA
haha! thats awesome! congrats on your purchase! I have to say that is quite an interesting Swap... good luck on your project/Gem??
Reply
Old Aug 1, 2011 | 12:13 PM
  #21  
wjoy21's Avatar
Can Post Only in New Member Section
 
Joined: Jul 2011
Posts: 1
Likes: 0
From: Ontario
wow that is weird!
Reply
Old Aug 1, 2011 | 02:46 PM
  #22  
hitlittle1's Avatar
Junior Member
 
Joined: Aug 2011
Posts: 15
Likes: 0
From: Englewood
People do some weird stuff to these cars, my FC has a 13b but its carberated, I think the intake came off a 12a or something, I'm not entirly sure.
Reply
Old Aug 3, 2011 | 08:46 AM
  #23  
Brichey1's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2011
Posts: 45
Likes: 0
From: Florida
I did a bunch of adjustments on the carb, it's running really smooth now, I just need something with more power, lol.
Reply
Old Aug 3, 2011 | 02:55 PM
  #24  
goeatpaiste's Avatar
Junior Member
Tenured Member: 15 Years
iTrader: (5)
 
Joined: Jul 2007
Posts: 35
Likes: 1
From: honeoye falls, ny
At first I was like WTF! But now I'm like "thats pretty F-in cool!". Dont swap it out, mod it!
Reply
Old Aug 4, 2011 | 04:15 PM
  #25  
Brichey1's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2011
Posts: 45
Likes: 0
From: Florida
Originally Posted by goeatpaiste
At first I was like WTF! But now I'm like "thats pretty F-in cool!". Dont swap it out, mod it!
It's too slow.
I'd keep it but in it's current state, IT couldn't pass a Geo Metro.

Dose anyone know anything about this engine?
A buddy was telling me that they use the head on this engine on a 4 cyl Mustang engine, and that people have made 400whp with it.
Is it possible that i could already have the block?
If anyone knows anything about it I'd really like some information on it.

Edit, The head is a DOHC head, I found some info on it, so it's not mine.
But..
Still there must be something i don't know about this engine.

For some reason someone went through the trouble of swapping it, there's something to it right?

Last edited by mar3; Aug 22, 2011 at 10:47 PM. Reason: Merged back-to-back posts...
Reply



All times are GMT -5. The time now is 12:21 PM.