New member from Ireland
05-07-12, 12:48 PM
#129
Full Member
Thread Starter
Join Date: Nov 2011
Location: Ireland
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Just getting the gap lines sorted
This square bit is where the roof scoop will go so this has to painted before i put the roof scoop back on as i am fiberglassing the roof 10mm
Just getting the door gaps sorted bit of sanding ahead
A few small pin hole to be filled in
This is the sun visor i had made just putting it on
Just getting the lines before i cut it
Got the rest of the visor done
Put the red pin stripe on (This was the easy part)
Roof scoop all painted white ready for carbon fiber
This square bit is where the roof scoop will go so this has to painted before i put the roof scoop back on as i am fiberglassing the roof 10mm
Just getting the door gaps sorted bit of sanding ahead
A few small pin hole to be filled in
This is the sun visor i had made just putting it on
Just getting the lines before i cut it
Got the rest of the visor done
Put the red pin stripe on (This was the easy part)
Roof scoop all painted white ready for carbon fiber
05-07-12, 06:14 PM
#131
And btw what the hell is that Murcielago made of? Wood?! A replica i beleive?!
05-10-12, 02:17 PM
#133
Full Member
Thread Starter
Join Date: Nov 2011
Location: Ireland
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Replaced the indicator bulb to a 21watt bulb
Drivers side rear light all wired
Spaghetti junction
Indicators all working at last just need to be wired into the mr2 harness
Rear lights all working
A friend in the UK sent me this over
A friend of mine bought his daughter a 106 starter car so i decided to give him a hand in changing the rear axel
Axel out
Secondf hand axel all re-done and put back in
All back in
Drivers side rear light all wired
Spaghetti junction
Indicators all working at last just need to be wired into the mr2 harness
Rear lights all working
A friend in the UK sent me this over
A friend of mine bought his daughter a 106 starter car so i decided to give him a hand in changing the rear axel
Axel out
Secondf hand axel all re-done and put back in
All back in
05-11-12, 01:44 PM
#135
Full Member
Thread Starter
Join Date: Nov 2011
Location: Ireland
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
@ yoona - Cheers
Ok filler arrived that was ordered months ago from Spain so i started skimming the car im going at it in three stages as i want to keep the lines on the car
Top section first
Middle section next
Lots od sanding ahead
Ok filler arrived that was ordered months ago from Spain so i started skimming the car im going at it in three stages as i want to keep the lines on the car
Top section first
Middle section next
Lots od sanding ahead
05-13-12, 06:43 AM
#139
Full Member
Thread Starter
Join Date: Nov 2011
Location: Ireland
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Cheers guys cant wait to see it in primer :-) my arms are in pain from sanding only 2 weeks left of this sanding :-(
Second section skimmed
Front bonnet skimmed
As you can see the low spots wher the black is
A few low spots left
Bonnet all sprayed black ready for block sanding
Blocked sanded and re-filled the low spots
Still on section 2 a few low spots this side of the kit was the worst due to the previous owner storing them in the corner of his garage in a heap
As you can see the skim looks heave but it light as you can still see the white gel coat underneath
Bonnet coming along
The 3rs section skimmed it looks heavy but its not if you look closely you can see the white gel coat
Second section skimmed
Front bonnet skimmed
As you can see the low spots wher the black is
A few low spots left
Bonnet all sprayed black ready for block sanding
Blocked sanded and re-filled the low spots
Still on section 2 a few low spots this side of the kit was the worst due to the previous owner storing them in the corner of his garage in a heap
As you can see the skim looks heave but it light as you can still see the white gel coat underneath
Bonnet coming along
The 3rs section skimmed it looks heavy but its not if you look closely you can see the white gel coat
05-16-12, 01:48 PM
#143
Full Member
Thread Starter
Join Date: Nov 2011
Location: Ireland
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
The 3rd section skimmed
Sanded the black spots all low spots
Low spots all re-fillered
Front section getting skimmed
Bonnet section nearly done
Block sanding coming along
Front sprayed for low spots
Only a few spots left
Front splitter remove and car jacked up for easy sanding
Coming along
Sanded the black spots all low spots
Low spots all re-fillered
Front section getting skimmed
Bonnet section nearly done
Block sanding coming along
Front sprayed for low spots
Only a few spots left
Front splitter remove and car jacked up for easy sanding
Coming along
05-24-12, 02:41 PM
#147
Full Member
Thread Starter
Join Date: Nov 2011
Location: Ireland
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Ok nothing major going on only that my arms well i cant feel them anymore
Drivers side 95% done
Front bumper nearly all done
Passenger side left so start at the rear
First skim of filler
Passenger side bonnet quiet a few dip in it
Ariel shot its just so big
There is a Toyota Mr2 in there somewhere
The line that has to be skimmed
First skim of filler
Sprayed black for low spots
All block sanded and re-fillered the fiberglass whoever layed is pure crap
Getting there pity popi isisnt around
Drivers side 95% done
Front bumper nearly all done
Passenger side left so start at the rear
First skim of filler
Passenger side bonnet quiet a few dip in it
Ariel shot its just so big
There is a Toyota Mr2 in there somewhere
The line that has to be skimmed
First skim of filler
Sprayed black for low spots
All block sanded and re-fillered the fiberglass whoever layed is pure crap
Getting there pity popi isisnt around
05-24-12, 02:42 PM
#148
Full Member
Thread Starter
Join Date: Nov 2011
Location: Ireland
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
All sanded the first section and a new top line i had to do
Second section skimmed and left to dry as i was wrecked by 4 o clock i had to call it a day as it was 21 degrees out
Second section skimmed and left to dry as i was wrecked by 4 o clock i had to call it a day as it was 21 degrees out
05-29-12, 01:52 PM
#150
Full Member
Thread Starter
Join Date: Nov 2011
Location: Ireland
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Lots of skimming going on
All sanded
Alot of low spots
Coming along
Still a bit to do
All the low spots nearly gone
I cut the new closing lines on the front bonnet
Getting there now at last
All sanded
Alot of low spots
Coming along
Still a bit to do
All the low spots nearly gone
I cut the new closing lines on the front bonnet
Getting there now at last