New Here From CALIFORNIA
#1
Junior Member
Thread Starter
Join Date: Aug 2014
Location: CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
New Here From CALIFORNIA
My Name is Giovanni Alcala
UPDATE!!! 08/12/2014
Hello my fellow rx8 and rotary lovers... I'm new here, Kinda.
let me first start with some backround.
I am from Gilroy, CA. went to San Diego to purchase my 2004 Mazda RX-8 GT. Lightning Yellow. she was a beauty, fully loaded, heated seats, leather, Bose,
sport pckge etc etc...
Brought her home, (thanks to this forum i've been making full use of the "Search" function.)
Because of a CEL. i replaced the coils, plugs, wires, air filter and gas cap.
she ran superb for a few months, then my uh "bearing" for the tranny went out. forgot what it was called, so i went ahead and replaced the clutch with a Exedy Organic clutch kit. (no more Slipping) purchased at 62k miles.
First things i did was window tint, paint stock rims Black, put in Grom Bluetooth to stream music via my iphone BLuetooth. then i put in a Single Alpine Type-R 10" Sub. and Alpine Mono AMP. sat on that untill april-may 2013.
Here are pics of it stock...with tint and system
Then Between April-May 2013 the MOD bug got a hold of me and i started making large orders of parts... i was already lurking these forums and Google, i knew what i wanted.
The Paint Process...
UPDATE!! 08/12/2014
Here's the list of what i put in to date.
Exterior:
- Genuine Mazdaspeed Bumper
- Mazdaspeed R3 side skirts
- MS Replica Carbon Fiber Wing
- MS Replica Rear bumper
- Seibon Carbon Fiber Hood
- Voltex Custom V mount Type 3 Wing (on the way still, ordered in April 2014)
- Carbon Fiber side skirt Lip
- Carbon Fiber License plate Holder
- Carbon Fiber Mirror Covers
- Changed Paint color to Circa 2005+ Honda S2000 Yellow Pearl.
- Volk TE37SL 18x9.5 +22
- Federal Evo 595 225/35/18 Tires
- Stance GR+ Coilovers
- StopTech Cross Drilled and Slotted Rotors
- Nissan Z32 4pot caliper conversion
- Hawk HPS Pads
- StopTech Steel Braided Lines
- LED lighting on Lic plate, etc
- Mazdaspeed Yellow Fog Lights
Interior:
- LED Lighting upgrade
- GROM Bluetooth adapter to stream Music via BLuetooth
- Alpine Mono AMP
- Alpine 10" Type-R Sub and enclosure
- LOC for signal to amp.
- Re-Upholstered Red leather Seats (heated still)
- Digital Guard Dawg RFID Push button start and keyless entry. (will get pics soon)
- AutoExe Steering Wheel
- Alcantara Head Liner
- Cusco 6-Point Cromoly Roll cage
- Cusco Carbon Fiber Bolt on bars for the rear, they cross in a X pattern
- New floor mats OEM
- ProSport Evo oil pressure, oil temp, water temp, AFR, Boost Gauges
- LO-TEK Center 3 Gauge pod
Engine Bay:
- BHR ignition KIT
- K&N stock filter
- Mazmart Low Temp T-Stat
- Mazmart Upgraded Water Pump
- oil temp and pressure sensor sandwich
- water temp sensor adaptor
- Axial Short Shifter
- Resevoir tank upgrade
- Koyo Radiator
- RX8 Performance Dual oil cooler fans
- Apex-i Single Exit Turbo N1 Muffler.
- BHR Midpipe upgrade
- Cusco Carbon Fiber Strut Bar
AND HERE'S THE TRANSFORMATION SO FAR...
UPDATE!!! 08/12/2014
Hello my fellow rx8 and rotary lovers... I'm new here, Kinda.
let me first start with some backround.
I am from Gilroy, CA. went to San Diego to purchase my 2004 Mazda RX-8 GT. Lightning Yellow. she was a beauty, fully loaded, heated seats, leather, Bose,
sport pckge etc etc...
Brought her home, (thanks to this forum i've been making full use of the "Search" function.)
Because of a CEL. i replaced the coils, plugs, wires, air filter and gas cap.
she ran superb for a few months, then my uh "bearing" for the tranny went out. forgot what it was called, so i went ahead and replaced the clutch with a Exedy Organic clutch kit. (no more Slipping) purchased at 62k miles.
First things i did was window tint, paint stock rims Black, put in Grom Bluetooth to stream music via my iphone BLuetooth. then i put in a Single Alpine Type-R 10" Sub. and Alpine Mono AMP. sat on that untill april-may 2013.
Here are pics of it stock...with tint and system
Then Between April-May 2013 the MOD bug got a hold of me and i started making large orders of parts... i was already lurking these forums and Google, i knew what i wanted.
The Paint Process...
UPDATE!! 08/12/2014
Here's the list of what i put in to date.
Exterior:
- Genuine Mazdaspeed Bumper
- Mazdaspeed R3 side skirts
- MS Replica Carbon Fiber Wing
- MS Replica Rear bumper
- Seibon Carbon Fiber Hood
- Voltex Custom V mount Type 3 Wing (on the way still, ordered in April 2014)
- Carbon Fiber side skirt Lip
- Carbon Fiber License plate Holder
- Carbon Fiber Mirror Covers
- Changed Paint color to Circa 2005+ Honda S2000 Yellow Pearl.
- Volk TE37SL 18x9.5 +22
- Federal Evo 595 225/35/18 Tires
- Stance GR+ Coilovers
- StopTech Cross Drilled and Slotted Rotors
- Nissan Z32 4pot caliper conversion
- Hawk HPS Pads
- StopTech Steel Braided Lines
- LED lighting on Lic plate, etc
- Mazdaspeed Yellow Fog Lights
Interior:
- LED Lighting upgrade
- GROM Bluetooth adapter to stream Music via BLuetooth
- Alpine Mono AMP
- Alpine 10" Type-R Sub and enclosure
- LOC for signal to amp.
- Re-Upholstered Red leather Seats (heated still)
- Digital Guard Dawg RFID Push button start and keyless entry. (will get pics soon)
- AutoExe Steering Wheel
- Alcantara Head Liner
- Cusco 6-Point Cromoly Roll cage
- Cusco Carbon Fiber Bolt on bars for the rear, they cross in a X pattern
- New floor mats OEM
- ProSport Evo oil pressure, oil temp, water temp, AFR, Boost Gauges
- LO-TEK Center 3 Gauge pod
Engine Bay:
- BHR ignition KIT
- K&N stock filter
- Mazmart Low Temp T-Stat
- Mazmart Upgraded Water Pump
- oil temp and pressure sensor sandwich
- water temp sensor adaptor
- Axial Short Shifter
- Resevoir tank upgrade
- Koyo Radiator
- RX8 Performance Dual oil cooler fans
- Apex-i Single Exit Turbo N1 Muffler.
- BHR Midpipe upgrade
- Cusco Carbon Fiber Strut Bar
AND HERE'S THE TRANSFORMATION SO FAR...
#6
Junior Member
Thread Starter
Join Date: Aug 2014
Location: CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Now the FUN part!
should have had this all done in June 2014.... but i bought a new car.
Anyways... Continuing
This will all be in the car, running and tuned by the end of the month (August 2014). Will have 2 tunes, 91oct and e85. I'm sure i will forget somethings, bare with me.
Engine is being built by Daniel kuo at Garage Life in LA.
- 13b-rew swap
- RX8Performance Swap engine mount Kit
- Xcessive LIM
- Bridgeport
- 13B stud Kit
- Atkins Overhaul Kit
- Rotary Aviation 2mm Apex Seals
- T4 Custom Turbo Manifold
- Garrett GTX4294r 1.15ar
- Injector Dynamics 2000cc x 4
- Injector Dynamics 1000cc x 2
- 4'' Downpipe and 4" Exhaust
- Custom 3" intercooler pipping
- Adaptronics Standalone ECU
- LS3 Ignition Coils
- Walbro 485 Fuel Pump E85
- Steel Braided Fuel Lines
- FueLab FPR
- Full Function Engineering Fuel Kit
- FFE 4 Injector Fuel Rail
- FFE 2 injector primary fuel rail
- Tial Q 50mm BOV
- HKS 50mm Wastegate
- Full Race Vacuum Block
- RX8Performance Catch Can
- Mac Boost Valve
- Apex-i Turbo Timer
- ACT Clutch Kit
That's it for now.... i think
UPDATE!! 08/12/2014
Goal: 600WHP
UPDATE!! 08/12/2014 PICS!
WekFest Long Beach May 2014
Blox Evolution (July 2014)
should have had this all done in June 2014.... but i bought a new car.
Anyways... Continuing
This will all be in the car, running and tuned by the end of the month (August 2014). Will have 2 tunes, 91oct and e85. I'm sure i will forget somethings, bare with me.
Engine is being built by Daniel kuo at Garage Life in LA.
- 13b-rew swap
- RX8Performance Swap engine mount Kit
- Xcessive LIM
- Bridgeport
- 13B stud Kit
- Atkins Overhaul Kit
- Rotary Aviation 2mm Apex Seals
- T4 Custom Turbo Manifold
- Garrett GTX4294r 1.15ar
- Injector Dynamics 2000cc x 4
- Injector Dynamics 1000cc x 2
- 4'' Downpipe and 4" Exhaust
- Custom 3" intercooler pipping
- Adaptronics Standalone ECU
- LS3 Ignition Coils
- Walbro 485 Fuel Pump E85
- Steel Braided Fuel Lines
- FueLab FPR
- Full Function Engineering Fuel Kit
- FFE 4 Injector Fuel Rail
- FFE 2 injector primary fuel rail
- Tial Q 50mm BOV
- HKS 50mm Wastegate
- Full Race Vacuum Block
- RX8Performance Catch Can
- Mac Boost Valve
- Apex-i Turbo Timer
- ACT Clutch Kit
That's it for now.... i think
UPDATE!! 08/12/2014
Goal: 600WHP
UPDATE!! 08/12/2014 PICS!
WekFest Long Beach May 2014
Blox Evolution (July 2014)
Trending Topics
#13
Junior Member
Thread Starter
Join Date: Aug 2014
Location: CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#16
Junior Member
Thread Starter
Join Date: Aug 2014
Location: CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#17
Junior Member
Thread Starter
Join Date: Aug 2014
Location: CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
You sir... have a beautiful 8
what front splitter is that?
Thread
Thread Starter
Forum
Replies
Last Post