Need your Help I am a NOOB
#54
Wankel Wankel!
iTrader: (5)
Join Date: Sep 2007
Location: Santa Barbara, CA
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
Well thats exactly my point 2k barely gets you a paint job better then macco. Thats why I think its a waste if his paint already looks as good as it does. I never really understood needing absolutely flawless paint (unless it was like a show car), I rather have decent factory paint still intact that is better quality but has a little love here and there.
#55
Mi Dios Esta Pasao
Thread Starter
Join Date: Nov 2008
Location: KILLEEN TEXAS FT HOOD
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
All that make more sense to me now, I will get a touch up on some flaws it has and then, I will buy all reliability MODS and put them on all at once or one at a time depending on availability, I am about to get a HKS Downpipe, I am looking for a good IC at a good price that will fit in the stock location.
#63
Wankel Wankel!
iTrader: (5)
Join Date: Sep 2007
Location: Santa Barbara, CA
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
http://cgi.ebay.com/ebaymotors/93-rx...Q5fAccessories
^that one looks pretty banged up, but a PFS, greddy or any of the other major performance brands have stock location intercoolers
^that one looks pretty banged up, but a PFS, greddy or any of the other major performance brands have stock location intercoolers
#64
Mi Dios Esta Pasao
Thread Starter
Join Date: Nov 2008
Location: KILLEEN TEXAS FT HOOD
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Just got my downpipe on Saturday and I have the car on set up on towers, I hope it all goes smooth with the install, I will update as soon as I get started.
#66
Mi Dios Esta Pasao
Thread Starter
Join Date: Nov 2008
Location: KILLEEN TEXAS FT HOOD
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
I now today is 30 DEC 10 minutes after midnight and I am still at work, I will get off work around 9 in the morning with time for a NAP and then time to start the MODS
#67
dorito powered
iTrader: (5)
Join Date: Mar 2008
Location: Lincoln, NE
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
http://cgi.ebay.com/ebaymotors/93-rx...Q5fAccessories
^that one looks pretty banged up, but a PFS, greddy or any of the other major performance brands have stock location intercoolers
^that one looks pretty banged up, but a PFS, greddy or any of the other major performance brands have stock location intercoolers
#73
Mi Dios Esta Pasao
Thread Starter
Join Date: Nov 2008
Location: KILLEEN TEXAS FT HOOD
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Ok finally Got the Downpipe installed, OMG this was not as easy as it looks, I first got all the bolts soaked on DP Blaster / Liquid Wrench, well today I got all bolts out and there was only one stud, the other 3 bolts looked to be ok but I when ahead and got new ones with new lock washers, The downpipe when in easy it line up pretty good with my HF Cat and the Apexi N1 dual. finally Was able to get all 3 bolts back on the only problem was that I had to use an open wrench because the socket was not able to get in there, the space was very tight, because the DP is a full 3", that’s my guess. After 2.5 hours later I got all 3 bolts and the one nut nice and tight. And I did use the locking thingy. My boost is maybe 11 8 11 or maybe I am thinking it is but its running lot stronger and it sounds sweetttttt.
#74
Mi Dios Esta Pasao
Thread Starter
Join Date: Nov 2008
Location: KILLEEN TEXAS FT HOOD
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Ok so today I got the car registerd in TX and it pass with no problems the STATE INSPECTION. OMG the 3rd gear is crazy I was about 90 miles and hour and it was still pulling, not so sure about how close was it to 90 but it was FASTTTT, due to weather conditions I had to slow down but I am HOOKED