getting back to it.
#1
getting back to it.
hey there, long time member but have been dormant for a long time. My last RX-7 was about 5 years ago. Back then I had a 83 GSL w/ an SE suspension swap. I was running a 12A that I rebuilt myself with a kit from Atkins and some templates from Pineapple Racing. Before that I owned a 79 Spark Yellow with a 13B BP with a Holley and a bunch of other ones/parts cars. Anyway with the current situation I decided to go into my parts stash and got the itch again. I hope to find a shell (GSL or better) and throw one of my set ups into. Was bored this morning decided to fix an old side draft set up I found. I also have to do a similar repair to a Holley intake I dropped. Cheers!
this is a short intake. Puts the carb towards the strut tower. The carb is a 42 DCOE will be rebuilt. Might also rebuild a 45 DCOE and a 44Mikuni to play around with this intake.
I broke the manifold a long time ago. Decided to weld up a new ear for it.
Done...
Rebuilding this 48 IDA also. I got some air stacks,rebuild kit,regulator/gauge and fuse block.
this is a short intake. Puts the carb towards the strut tower. The carb is a 42 DCOE will be rebuilt. Might also rebuild a 45 DCOE and a 44Mikuni to play around with this intake.
I broke the manifold a long time ago. Decided to weld up a new ear for it.
Done...
Rebuilding this 48 IDA also. I got some air stacks,rebuild kit,regulator/gauge and fuse block.
Last edited by Jibaro 12A; 04-30-20 at 03:47 PM. Reason: missing info
Thread
Thread Starter
Forum
Replies
Last Post