my alarm just all of a sudden stopped working the other day. it's not the remote's batteries or anything like that. it's like it doesn't even acknowledge the remote's signals. what could this be? it doesn't go off or arm when the door is locked. is there a receiver that maybe has a bad wire. also the little horn hasn't worked for a while. Why would that be. i don't know very much about alarms so try to keep it simple

 

ck the alarm fuse.

 

alright. i'll try that. is it usually close to the alarm unit or on it?

 

It's probably an inline fuse. Find the alarm unit, and trace the wires back until you find a plastic "bulge" on one or more of the wires.

 

most likely by your battery

 

ok i checked all the fuses i could find and didn't find any burned out ones. any other ideas

 

Did you check the battery in your remote? Mine went dead after the other minute working fine. Just a chance?

 

yeah i did it's just fine. im pretty sure it's the alarm becuase it used to arm when i locked it manually but now it doesn't even do that

 

come on people there has to be somebody who knows what's goin on. post replys

 

Sorry, but there are a lot of ways to install an alarm. It makes it hard to diagnose something like this.

What kind is it? Do you know where the alarm "brain" is? If you can find it, start tracing wires back...

Maybe you have a basic keyless entry system hooked into the stock alarm...

 

it is a clarion ungo alarm. i do know where the brain is. i guess i'll have to start tracing wires

 

omg alarm problems? damn now im reconsidering installing my alarm ... umm if your alarm is anything like mine there should b a 20a fuse connected to the parking light and a 5a fuse connected to the battery ... check those if you havent already. jus a question for anyone ... how many main parts are ther to a alarm? i have 3 units plus a siren... is that correct?