YellowJacket7

iTrader: (2)

I saw some info on this guy's website for a conversion process from the US tail lights to the J-spec 1999 tail lights.

http://reganrotaryracing.tripod.com/lipntail.htm

I tried contacting the guy whose e-mail was given (Ryan Wolfe), but didnt get a response. Does anyone know this guy or how he can be reached or, alternatively, anyone else who does the same conversion?

Mahjik

iTrader: (1)

https://www.rx7club.com/interior-exterior-audio-26/99-spec-fd-round-tail-lights-rx7even-work-83529/

I don't know if Ryan is still doing the work anymore. There are a few others on the site who also do decent work as well.

YellowJacket7

iTrader: (2)

Thanks!

cesarx7

iTrader: (1)

https://www.rx7club.com/interior-exterior-audio-26/99-spec-tail-lights-done-sevenlust-617832/

YellowJacket7

iTrader: (2)

Rock on! Thanks.

seven lust

iTrader: (5)

pm me if you need them done, thanks

7syawedis

iTrader: (1)

the real ones are getting cheaper if you look on ebay, sometimes, or japanese auctions. i got mine for $178 if you can believe that. +shipping
i also sold my stock ones to one of the guys doing the conversions i think

MAZDASPEEDS FD3S

Seven Lust Did My Lights And I Must Say They Look Just Like The Original 99 Spec! I Highly Recommend Him!
Manny

Ralphy

what has to be changed to get the 99 to work?

seven lust

iTrader: (5)

nothing has to be changed. you will still be using the stock housing and all, send them to me and I can take them apart for you and convert them. In all it takes about a week with shipping both ways .

RX72NR

iTrader: (1)

I highly recommend sevenlust, his conversion rocks. Your lights will look factory new again!

Ralphy

what does it cost? My car is going to be off the road for winter would be a great time.

Ralphy

Do you replace the outer lens?

seven lust

iTrader: (5)

no, it is the inside lens that gets converted. The outer lens I will clean up and return them looking better then when you sent them to me . pm me for more info. thanks