Radio Install question
#4
Mike Honcho
Join Date: May 2007
Location: des moines iowa
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
first you need to specify what year of car you have, then you need to look in the correct section for your car, then either look up a fsm (factory service manual) or go buy a haynes manual
#7
Lost You in the Rear View
Join Date: Jul 2007
Location: Rocky Hill, CT
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
i didn't have to remove my stock radio because it was done for me, but usually there are 2 holes on either side of the radio. i just stick a u shaped piece of coat hanger into both sides (about 3-4 inches of length goes inside the holes) and push them outwards while pulling towards you. this should release the clips holding the radio in. now all you need is the proper harness adapter (or wiring diagram should you choose to hardwire)
good luck
good luck
Trending Topics
#8
FREAK ALL OUT!!!
iTrader: (17)
Join Date: Jul 2006
Location: Vancouver, WA
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
What ^ He Said Or Get Ford Radio Removal Tools They Are Like Twelve Bucks If You Cant Get The Coat Hangers To Work, And Also Do Not Whatever You Do Cut Your Harness There Is An Adapter Carried By Pretty Much Every Local Shop That Will Plug Right In. By The Way If It Is Bose It Will Be A Little More Work That A Standard Radio.
#10
FREAK ALL OUT!!!
iTrader: (17)
Join Date: Jul 2006
Location: Vancouver, WA
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
just look here http://images.google.com/imgres?imgu...US262%26sa%3DN
#12
Junior Member
Thread Starter
Join Date: Mar 2008
Location: Miami
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Well I finally had a chance to get the radio out and well to my surprise the wire harness has been chopped up its pretty bad. If anyone has a spare laying somewhere that would be great or so simple directions on hardwiring it that works to.
#13
FREAK ALL OUT!!!
iTrader: (17)
Join Date: Jul 2006
Location: Vancouver, WA
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
Here is the wire diagram for a 93 fd without bose, I suggest always testing just to be safe.
Wire Function Color Note Fuse # Size Location
+12V DC Battery(Constant) Blue/red Room 10 amp Joint box
Switched Accessory Blue/black Cigar 15 amp Joint box
Ground Black
Power Antenna Green/orange
Remote Turn On(output) Green/orange Also light green/black, thru the radio relay
Left Front + Green To the door speaker & to the center speaker amplifier
Left Front - Blue To the door speaker & to the center speaker amplifier
Right Front + Red To the door speaker & to the center speaker amplifier
Right Front - White To the door speaker & to the center speaker amplifier
Left Rear + Yellow/green
Left Rear - Yellow/blue
Right Rear + White/blue
Right Rear - Blue/yellow
Wire Function Color Note Fuse # Size Location
+12V DC Battery(Constant) Blue/red Room 10 amp Joint box
Switched Accessory Blue/black Cigar 15 amp Joint box
Ground Black
Power Antenna Green/orange
Remote Turn On(output) Green/orange Also light green/black, thru the radio relay
Left Front + Green To the door speaker & to the center speaker amplifier
Left Front - Blue To the door speaker & to the center speaker amplifier
Right Front + Red To the door speaker & to the center speaker amplifier
Right Front - White To the door speaker & to the center speaker amplifier
Left Rear + Yellow/green
Left Rear - Yellow/blue
Right Rear + White/blue
Right Rear - Blue/yellow
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM