NEXT Miracle x-Bar compatible with Harness?
06-30-20, 08:08 PM
#1
Junior Member
Thread Starter
NEXT Miracle x-Bar compatible with Harness?
Hi, does anyone know if the NEXT Miracle X-Bar is compatible with harnesses? I'm looking for a harness bar for track day use but dont want to cut and weld a full cage, as the car sees street use. Thanks for all your input and info!
The following users liked this post:
y0ungjoker (08-07-20)
03-06-21, 01:36 PM
#2
Newbie
Join Date: Apr 2019
Location: London, UK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
it would work, just wrap the harness around the bar.
but whether it's recommended or not is another story. I dont think NEXT designed it for a harness, as there isn't any eyelets or any harness guides hence i wouldn't do it. Also a 4 point harness without a cage will potentially make it less safe, compared to a regular 3 point seat belt (i am sure others can chime in on this topic)
but whether it's recommended or not is another story. I dont think NEXT designed it for a harness, as there isn't any eyelets or any harness guides hence i wouldn't do it. Also a 4 point harness without a cage will potentially make it less safe, compared to a regular 3 point seat belt (i am sure others can chime in on this topic)
04-08-21, 05:24 AM
#3
I've also read that a 4 point harness without a cage isn't as safe, in the event of a rollover you would be stuck in your driving position while the roof collapsed and with a 3 point you could move/slide off to the side.
AGI makes a 4 point bolt-in cage that I would consider instead, they quoted me somewhere around $1,400 shipped to the east coast with the X bar.
https://agiprecision.com/mazda/rx7-f...-point-bolt-in
AGI makes a 4 point bolt-in cage that I would consider instead, they quoted me somewhere around $1,400 shipped to the east coast with the X bar.
https://agiprecision.com/mazda/rx7-f...-point-bolt-in
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
3rd Generation Specific (1993-2002)
1
12-31-14 05:30 AM