MOMO steering wheel fitment for FD
03-17-02, 08:58 AM
#1
MOMO steering wheel fitment for FD
I was going to buy a MOMO steering wheel but the place i tried to buy it said they didnt have any application for fitment on the 3rd Gen. I have seen a few 3rd gens with these steering wheels but the place online seems to be the source for MOMO steering wheels and race seats etc. I figured they would know how to make it work but they pretty much told me to pack sand. I dont care about the airbag, I want the Sweet MOMO steering wheel. What are my options? Quick release? Hub adapters? Spacers? Give me the low down on what to use and where to get it! Thanks
03-17-02, 09:03 AM
#2
Go to www.corksport.com All you need is the hub adaptor and one spacer.you will also need the plug that makes the light for the airbag go off.If you cant find that though you can just pull out the bulb,as outlined in Robinettes site
03-20-02, 04:52 PM
#4
According to Corksport: The mazdaspeed hub adapter fixes the problem with fitment and has a wire harness to plug the SRS air bag module into so the Airbag light and SRS is defeated. Also you dont have to strip off the weatherpack connector on the Stock wiring harness. That means you can put your old wheel back on in case you need to pass inspection etc. without having to rewire everything. 150 bucks for the Hub.
03-22-02, 12:46 PM
#6
Adrenaline
Join Date: Feb 2001
Location: Long Island, NY
Posts: 1,261
Likes: 0
Received 0 Likes
on
0 Posts
The MOMO steering wheel will fit in an FD and you don't need to buy the Corksport's hub. The MOMO hub will work, however, you would have to buy it for a 2nd gen RX-7. The 2nd gen RX-7 hub fits in an FD without any problems. Here is a pic of my car with the MOMO steering wheel and I used the 2nd gen hub from MOMO.
https://www.rx7club.com/photo/index.php?photo=304
https://www.rx7club.com/photo/index.php?photo=304
