List of seats that fit and dont fit.
#176
If you put the stock seats from an EVO into an FD, your head will (probably) literally be through the roof.
The FC, FD, and MR-2 in my experience all have very low stock seats. The EVO and Impreza have so much extra headroom that if you install a racing seat on the floor, the car will look like it's being driven by a child. OTOH, a racing seat with the wrong rails in any of these cars will cause the seat to be HIGHER than the stock seat.
The FC, FD, and MR-2 in my experience all have very low stock seats. The EVO and Impreza have so much extra headroom that if you install a racing seat on the floor, the car will look like it's being driven by a child. OTOH, a racing seat with the wrong rails in any of these cars will cause the seat to be HIGHER than the stock seat.
#177
Bubblicious DEF.
iTrader: (36)
UPDATED
4-7-12
Just dry fitted pole positions in my car. required a lot of custom work but they do fit...
Will fit
1. Stock FD Seats (does this really need to be on the list?)
2. Recaros from the Spirt R
3. Gias Lowmax
4. Bride Zeta III
5. Bride Vios III lowmax
6. Mazdaspeed Type-F
7. Memoryfab s58
8. Corbeau - some models, they supply the custom racks.
9. Sparco Sprint V
10. Recaro Profi and or SPG ( with slight rubbing to the door but not much, if you use Recaro rails instead of bride it will fit fine)
11. Sparco Roadster
12. Sparco EVO with stock seat rail (shoulder bolster will rub on the door)
13. Sparco Milanos
14. Memory FAB S58
15. Recaro Spirit R will fit with AUTO POWER 6 point cage
Will fit with modifications
1. Corbeau FX1 - fits with seat modification. Corbeau FX1 Install in FD
2. Sparco Evo 2 - - fits with seat modification.
3. Rx-8 seats (can be made to fit by modifying the racks)
4.Cobra Imola (with some minor triming of door side shoulder wing)
5. Sparco Torino 2 (modify the stock rails and get rid of the seat belt buckle they fit (barely))
6. Recaro Sportster CS seats placed on stock rails (tight fit) http://users.telenet.be/sammyrx7/ima...29_JPG_jpg.jpg
7.Bride Vios III lowmax WITH AUTOPOWER 6 POINT CAGE, must notch the side of the frp
bucket for the side bars to fit. Everything else fits!
8. Recaro Pole Positions (HEAVY modification)
Will NOT fit
1. Sparco Fighter
2.Corbeu fx1 pro fit with no problems ,but if you have an autopower 6pt roll cage you won't be able to run the front of the cage because the seat sits high and blocks the halo bars .
4-7-12
Just dry fitted pole positions in my car. required a lot of custom work but they do fit...
Will fit
1. Stock FD Seats (does this really need to be on the list?)
2. Recaros from the Spirt R
3. Gias Lowmax
4. Bride Zeta III
5. Bride Vios III lowmax
6. Mazdaspeed Type-F
7. Memoryfab s58
8. Corbeau - some models, they supply the custom racks.
9. Sparco Sprint V
10. Recaro Profi and or SPG ( with slight rubbing to the door but not much, if you use Recaro rails instead of bride it will fit fine)
11. Sparco Roadster
12. Sparco EVO with stock seat rail (shoulder bolster will rub on the door)
13. Sparco Milanos
14. Memory FAB S58
15. Recaro Spirit R will fit with AUTO POWER 6 point cage
Will fit with modifications
1. Corbeau FX1 - fits with seat modification. Corbeau FX1 Install in FD
2. Sparco Evo 2 - - fits with seat modification.
3. Rx-8 seats (can be made to fit by modifying the racks)
4.Cobra Imola (with some minor triming of door side shoulder wing)
5. Sparco Torino 2 (modify the stock rails and get rid of the seat belt buckle they fit (barely))
6. Recaro Sportster CS seats placed on stock rails (tight fit) http://users.telenet.be/sammyrx7/ima...29_JPG_jpg.jpg
7.Bride Vios III lowmax WITH AUTOPOWER 6 POINT CAGE, must notch the side of the frp
bucket for the side bars to fit. Everything else fits!
8. Recaro Pole Positions (HEAVY modification)
Will NOT fit
1. Sparco Fighter
2.Corbeu fx1 pro fit with no problems ,but if you have an autopower 6pt roll cage you won't be able to run the front of the cage because the seat sits high and blocks the halo bars .
#181
Junior Member
iTrader: (4)
Join Date: Jun 2011
Location: San Francisco, CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I'm noticing that the Bride Zeta III's are in the "Will Fit" list, but doing research indicates that it should rub against the door. The only version that will definitely fit without causing rubbing would be the Zeta III Type-S. The Zeta IIIs are a lot wider than the VIOS IIIs! Can anyone definitely confirm this?
#182
Rotary Freak
iTrader: (14)
Prices vary too much over the life of this thread to have much meaning, where-as diminsionss, fit/don't fit are static. This tread is useful to combine with ones own research of what seat features one wants, price range acceptable etc to get teh ulitmate answer "Does the sucker even fit"
#183
Rotary Freak
iTrader: (14)
I'm noticing that the Bride Zeta III's are in the "Will Fit" list, but doing research indicates that it should rub against the door. The only version that will definitely fit without causing rubbing would be the Zeta III Type-S. The Zeta IIIs are a lot wider than the VIOS IIIs! Can anyone definitely confirm this?
To be conservative I placed my Cobra Imola seats in the "Will fit with mod category", they do rub the drivers door, but a minor snipping mod to the outside shoulder wing (not even noticable under the fabric and can't be a safety issue as the door is there anyways) fits fine. Mobs to stock seat rails to accept side mount was much more extensive.
#184
Senior Member
Join Date: Apr 2008
Location: Sarasota FL
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Prices vary too much over the life of this thread to have much meaning, where-as diminsionss, fit/don't fit are static. This tread is useful to combine with ones own research of what seat features one wants, price range acceptable etc to get teh ulitmate answer "Does the sucker even fit"
And since the list is using a reply with quote + add , then it's really easy to update pricing if it changes drastically.
There is now a fairly large list of seats that fit, so peoples choices will come down to price and style.
#186
Senior Member
Join Date: Apr 2008
Location: Sarasota FL
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
I have a 36" waist and wear a holster which adds another inch, so I have been concerned about fitting into most of these seats... i ended up ordering a pair of red Corbeau A4 with matching rails for the FD, around $900 shipped total.... they look good, not too expensive, and seem to have a fairly wide seat base while still fitting the FD
Will post some shots once in
Will post some shots once in
#187
Rotary Freak
iTrader: (4)
I have a 36" waist and wear a holster which adds another inch, so I have been concerned about fitting into most of these seats... i ended up ordering a pair of red Corbeau A4 with matching rails for the FD, around $900 shipped total.... they look good, not too expensive, and seem to have a fairly wide seat base while still fitting the FD
Will post some shots once in
Will post some shots once in
#188
Senior Member
Join Date: Apr 2008
Location: Sarasota FL
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
seats still not here yet... they thought the FD rail was in stock, but apparently their inventory list was wrong, so im waiting for them to ship still. hopefully here end of next week and ill post pics.
#189
Back door, no babies...
iTrader: (14)
UPDATED 4-24-12
Will fit
1. Stock FD Seats (does this really need to be on the list?)
2. Recaros from the Spirt R
3. Gias Lowmax
4. Bride Zeta III
5. Bride Vios III lowmax
6. Mazdaspeed Type-F
7. Memoryfab s58
8. Corbeau - some models, they supply the custom racks.
9. Sparco Sprint V
10. Recaro Profi and or SPG ( with slight rubbing to the door but not much, if you use Recaro rails instead of bride it will fit fine)
11. Sparco Roadster
12. Sparco EVO with stock seat rail (shoulder bolster will rub on the door)
13. Sparco Milanos
14. Memory FAB S58
15. Recaro Spirit R will fit with AUTO POWER 6 point cage
16. Recaro RS-G (All versions)
Will fit with modifications
1. Corbeau FX1 - fits with seat modification. Corbeau FX1 Install in FD
2. Sparco Evo 2 - - fits with seat modification.
3. Rx-8 seats (can be made to fit by modifying the racks)
4.Cobra Imola (with some minor triming of door side shoulder wing)
5. Sparco Torino 2 (modify the stock rails and get rid of the seat belt buckle they fit (barely))
6. Recaro Sportster CS seats placed on stock rails (tight fit) http://users.telenet.be/sammyrx7/ima...29_JPG_jpg.jpg
7.Bride Vios III lowmax WITH AUTOPOWER 6 POINT CAGE, must notch the side of the frp
bucket for the side bars to fit. Everything else fits!
8. Recaro Pole Positions (HEAVY modification)
Will NOT fit
1. Sparco Fighter
2.Corbeu fx1 pro fit with no problems ,but if you have an autopower 6pt roll cage you won't be able to run the front of the cage because the seat sits high and blocks the halo bars.
Will fit
1. Stock FD Seats (does this really need to be on the list?)
2. Recaros from the Spirt R
3. Gias Lowmax
4. Bride Zeta III
5. Bride Vios III lowmax
6. Mazdaspeed Type-F
7. Memoryfab s58
8. Corbeau - some models, they supply the custom racks.
9. Sparco Sprint V
10. Recaro Profi and or SPG ( with slight rubbing to the door but not much, if you use Recaro rails instead of bride it will fit fine)
11. Sparco Roadster
12. Sparco EVO with stock seat rail (shoulder bolster will rub on the door)
13. Sparco Milanos
14. Memory FAB S58
15. Recaro Spirit R will fit with AUTO POWER 6 point cage
16. Recaro RS-G (All versions)
Will fit with modifications
1. Corbeau FX1 - fits with seat modification. Corbeau FX1 Install in FD
2. Sparco Evo 2 - - fits with seat modification.
3. Rx-8 seats (can be made to fit by modifying the racks)
4.Cobra Imola (with some minor triming of door side shoulder wing)
5. Sparco Torino 2 (modify the stock rails and get rid of the seat belt buckle they fit (barely))
6. Recaro Sportster CS seats placed on stock rails (tight fit) http://users.telenet.be/sammyrx7/ima...29_JPG_jpg.jpg
7.Bride Vios III lowmax WITH AUTOPOWER 6 POINT CAGE, must notch the side of the frp
bucket for the side bars to fit. Everything else fits!
8. Recaro Pole Positions (HEAVY modification)
Will NOT fit
1. Sparco Fighter
2.Corbeu fx1 pro fit with no problems ,but if you have an autopower 6pt roll cage you won't be able to run the front of the cage because the seat sits high and blocks the halo bars.
#192
Senior Member
Join Date: Apr 2008
Location: Sarasota FL
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
STILL waiting on seats... i ordered both sparcos and corbeaus... both backordered... will see which gets here first and cxl the other
#199
REPU Garage
iTrader: (17)
Join Date: Jun 2007
Location: Northern Colorado
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
I'm 6'6" so I'm trying to find a seat I can use to fit with a helmet on as well. I have to basically fully recline the seat just to drive around so with a helmet my neck is angled and my driving position is horrible.
I think I'll try the Corbeau FX1 seats and attempt to get them as low as possible. For track days i could remove the bottom cusion Otherwise I may just concede I'm simply too tall for this car in general, let alone with a helmet.
I think I'll try the Corbeau FX1 seats and attempt to get them as low as possible. For track days i could remove the bottom cusion Otherwise I may just concede I'm simply too tall for this car in general, let alone with a helmet.