Led tails on fc
06-03-10, 09:59 PM
#1
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Led tails on fc
Today I received my 4" trailer lights and I am undertaken my conversion...
I'm highly surprised that the lights fit so well. Please excuse the pics...Iphone camera does not have a fllash....
Red has 72 leds.
Amber has 40 leds.
I'm highly surprised that the lights fit so well. Please excuse the pics...Iphone camera does not have a fllash....
Red has 72 leds.
Amber has 40 leds.
06-03-10, 11:15 PM
#2
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
More pics
Cleaned up the tail lights and test fitted.
06-09-10, 01:56 PM
#7
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
06-09-10, 02:11 PM
#8
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
So when you turn them on, they come on at one level and when you hit the brakes, the light up brighter right?
06-21-10, 10:58 PM
#12
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
06-21-10, 11:28 PM
#13
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
06-23-10, 03:04 PM
#15
rx7 almost a religon
iTrader: (1)
Join Date: May 2010
Location: aurora colorado
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
nice i'm looking at about 80$ plus shipping and it gives the lights a hole new look more modern thanks for posting i saw this on i think hyperteks car but thought it would be a lot more expensive.
06-23-10, 03:47 PM
#16
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
night shot
Last edited by JJ42072; 06-23-10 at 04:17 PM. Reason: youtube link
06-23-10, 04:20 PM
#17
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
It was pretty easy to wire as well. Pay close attention when wiring the amber LED because if you connect the wrong wire it will not be bright.
06-23-10, 04:22 PM
#18
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
sealing tail lights
I used 3M Window Weld to seal my tail lights. I have not had any issues with fogging or water in the tail lens. This can be purchased at Advanced Auto Parts or Pep Boys.
06-23-10, 04:25 PM
#19
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
06-25-10, 12:49 PM
#20
rx7 almost a religon
iTrader: (1)
Join Date: May 2010
Location: aurora colorado
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
hey i noticed that around 0:55-1:00 the turn signal dimed down and was very light was that the camera trying to focus or the does the "leds" not stay constant brightness i was thinking that a bigger fuse was need to keep up with the new voltage?
06-25-10, 10:22 PM
#21
PANAMAniac Rotor Head
Thread Starter
Join Date: Mar 2004
Location: ORLANDO FLORIDA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
It's the Camera...L.E.D.s are perfect!!
06-30-10, 12:24 AM
#22
they look like Semi-Truck tail lights.
i HATE when you can see each individual LED on tail lights. definitely not a fan.
http://www.buytruckstuff.com/product...=34&p_gpID=110
you should try my 'diffuser' method.
you could do the same thing that i did, but use a full circle instead of a ring.
i HATE when you can see each individual LED on tail lights. definitely not a fan.
http://www.buytruckstuff.com/product...=34&p_gpID=110
you should try my 'diffuser' method.
you could do the same thing that i did, but use a full circle instead of a ring.
06-30-10, 07:18 AM
#23
they look like Semi-Truck tail lights.
i HATE when you can see each individual LED on tail lights. definitely not a fan.
http://www.buytruckstuff.com/product...=34&p_gpID=110
you should try my 'diffuser' method.
you could do the same thing that i did, but use a full circle instead of a ring.
i HATE when you can see each individual LED on tail lights. definitely not a fan.
http://www.buytruckstuff.com/product...=34&p_gpID=110
you should try my 'diffuser' method.
you could do the same thing that i did, but use a full circle instead of a ring.
06-30-10, 09:18 PM
#25
Noob Member
iTrader: (1)
Join Date: Aug 2009
Location: Mesa, Az, Pheonix, Az
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
they look like Semi-Truck tail lights.
i HATE when you can see each individual LED on tail lights. definitely not a fan.
http://www.buytruckstuff.com/product...=34&p_gpID=110
you should try my 'diffuser' method.
you could do the same thing that i did, but use a full circle instead of a ring.
i HATE when you can see each individual LED on tail lights. definitely not a fan.
http://www.buytruckstuff.com/product...=34&p_gpID=110
you should try my 'diffuser' method.
you could do the same thing that i did, but use a full circle instead of a ring.