Keyless entry for FD
#2
suck me beautiful
iTrader: (8)
Join Date: Jul 2007
Location: San Clemente
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
anything is possible with a little planning...
absolutly, just trigger the alarm off when you unlock door, and trigger it on when you lock, i belive the keyless entry will provide with an output trigger for such events, just check the box and manual to make sure, hell everything is electrical so it must be possible
absolutly, just trigger the alarm off when you unlock door, and trigger it on when you lock, i belive the keyless entry will provide with an output trigger for such events, just check the box and manual to make sure, hell everything is electrical so it must be possible
#3
The factory disarm wire is in the driver kick panel. When you lock the car the factory alarm automatically arms. You will need to add an actuator on the driver door, that will lock and unlock the driver door, and the passenger door will lock and unlock with it.
#4
Rotary Enthusiast
iTrader: (31)
There is a thread going in FDnewbie's vendor section for FACTORY keyless entry.... from the later model rx7's in japan.
Problem is, we have been waiting for 6-7 months now. It's a long story, not ramy's fault, but depending on your time frame, you mgiht check it out.
Problem is, we have been waiting for 6-7 months now. It's a long story, not ramy's fault, but depending on your time frame, you mgiht check it out.
#5
No it's not Turbo'd
Yes, if you're curious, I'm about to take appart my driver door, and can show you how it's setup, incl. Wiring... since you're in Granda Hills, I suppose that's CA, you can drop by... I live in the Van Nuys Area...
Thread
Thread Starter
Forum
Replies
Last Post
edmcguirk
NE RX-7 Forum
3
05-30-18 06:50 PM
BLUE TII
Single Turbo RX-7's
10
09-26-15 10:12 PM