Interior / Exterior / Audio Talk about interior and exterior mods including audio.

installing a deck

Thread Tools
 
Search this Thread
 
Old Jun 20, 2004 | 11:33 PM
  #1  
moka-only's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 115
Likes: 0
From: Ottawa, Ontario
installing a deck

Hey
i just recently bought an alpine deck for my 86, i have the surround off, and i also bought a wiring harness for it. i just neet to know what coloured wires are what from the stock deck?
Reply
Old Jun 21, 2004 | 09:17 PM
  #2  
$100T2's Avatar
On the prowl for an FB
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2002
Posts: 2,932
Likes: 6
From: Surrounded by Sebey parts, Rhode Island
What did you get a wiring harness for? The car or the radio? If you bought a harness for the car specifically, it should A) plug right in, and B) tell you which wires are which. If that is not the case, then exercise a bit of common sense: Gray, green, purple, brown are usually speaker wires and come in pairs... Gray would be the + and gray w/ a black stripe would be the - for your speakers...

There will be two power wires... One is red, the other yellow. IIRC, the yellow is the constant power (for things like station memory... It should correlate with your deck) and the red goes to the ignition switch, thus turning on your deck when you turn on your car.

Black is obviously the ground wire. Blue goes to your power antenna to tell it to go up and down.

Remember to disconnect your battery before you do anything to the stereo.

Good luck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
sinclair7seven
General Rotary Tech Support
11
Sep 11, 2015 10:15 AM
astrum
2nd Generation Specific (1986-1992)
5
Sep 7, 2015 11:41 PM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM




All times are GMT -5. The time now is 11:16 AM.