Hey guys im looking into getting a Gp Drift kit and new fenders but my question is how would i make this to work *look at pics* (front of the fender and the side of the bumper)

 

anyone? has any ideas?

 

Well how the heck does the stock car's panels go together. It would seem to me that they either go together like the first one, or they go together like the 2nd one.

 

Stock looks like this ans you see the bumper dont go out into the fender

 

You'll have to either cut the fender (probably the easiest) or the bumber to make the parts fit together. It's a simple task for any real body shop to take care of....

 

That fender looks basically like an OEM fender save for the vent behind the wheel. The bumper's back section is designed to fit over the bottom front of the fender.

But, whenever you mix bodykit parts, you may have problems.

Many FC front noses have parts that sweep back over the bottom of the front fender to make it "fatter". If you have side skirts, the side skirts many times fit up over the bottom rear of the front fender, so you get a fat "line" going across the bottom of the car.

Dale

 

yea im getting the front bumper. side skirts, and rear bumper and these fenders are 20mm wider and im also getting the quater panel 20mm wider

 

you can send me your old fenders for free

 

Haha the pass fender has a lil rust on it and i dont want to bundle because i hate it... but the driver is perfect, when ill get my new ones ill sell you my driver side for 20 bucks and you pay shipping =)

 

first off...its too much work ...second in order for this to work you will have to cut the fender socket for the side markers because the body kit has the socket already...then you would have to find a way to get rid of the gap tha its gonna leave from adding 1/2''of fiberglass....i did it thats why

 

hmm i was asking because my cousin paints cars so i getr a free paint job just have to supply everything and help him sand and stuff... so i guess ill go to a body shop and get the front and fenders done... thanks alot

 

those GP fenders fit like a turd in a cup of coffee.....

and the bumper goes OVER the fenders, don't cut the fender portion it overlaps off.....you need it to secure the bumper.