I have a 93 VR RX7 with a 99 spec spoiler and I am planning to install a 99 spec front bumper. I would like to switch to the flying M emblems in front and rear. Also the rear of the car is missing the Mazda and RX7 emblems. I am trying to find where to buy these but I haven't had much luck. I have found the flying M emblems at http://www.srmotorsports.com/sr9399ef.html. But there are similar emblems on eBay for much cheaper, but I don't know if those are close to the same size or what.

Does anyone have any recommendations of where to buy these emblems?

 

I know that RHDJapan.com has them, great website.

 

I found some more info:

Front emblem: F141-51-731A, 3 x 2 3/8
Rear emblem: F138-51-731, 3 3/8 x 2 5/8 inch incheses

Here is the listing at rhdjapan.com.

http://www.rhdjapan.com/mazda-oem-cu...fd3s-13b-11868

After shipping they are about $70. I would like to find them for cheaper. I heard you can buy them from Mazda Motorsports, so I may just have to wait until I get a few autox events done so I can register for Mazda Motorsports.

Mazdatrix has the Mazda and RX7 emblems.

RX7- 51-721C-FD01
Mazda - 51-711A-FD01

 

could you go to your local dealer and use from a late model mazda

 

Call Ray at Malloy Mazda. He will take care of you if you tell him you are from RX7 Club.

 

Ray at Malloy Mazda recommended me Miata emblems which he uses himself. Plus they aren’t that expensive I think I payed less than $30 for both front and rear.

 

I'm seeing the "Flying M" emblem all over eBay for CHEAP:

http://shop.ebay.com/i.html?_from=R4...All-Categories

I trying to do the "RX-8" & "CX-7" emblem combination that I've seen some people do to get a more "modernized" RX-7 emblem...

EDIT: I just ordered them. ^.^

 

looks like somebody beat you to it
http://www.wvstreets.co/forums/showt...d-Now%29/page4

 

I knew I wasn't first, lol.

I got the idea after seeing another forum member with it!

Doesn't it look AWESOME, though?

^.^

I'm debating on whether or not I want to do any kind of "Mazda" emblem...

I'm debating between the standard OEM "mazda" emblem, or if maybe I wanna try chopping a "mazdaspeed" emblem in half.

What do you think?

 

my ebay ones look great, they are from the miata, just check the size, obviously the pins dont fix but double sided 3m tape and correct positioning will cover them, you have to cut the pins on the emblems.

 

just talked to a dealer in Vancouver and the emblems for the "cursive" update are about 22 for the CX7 and 23 for the RX8. In case anyone was wondering.

 

I was talking to a guy i know that made some emblems for my ws6 and my friends camaro. Idk if anybody else would be interested but this is what i was going for. The last pic of the camaro emblem he did so you can get an idea of what they would look like finished.





and the example.

 

I'm the opposite...I want to take all the emblems off. I figure the people who know matter will know what it is without the emblems...and to hell with the rest.