mr rxeven

iTrader: (1)

I made some black floor mats and bolted on an alloy foot plate, but it would always move and need adjusting. and with the new alloy pedals it looked cheap.
I found some fake leather seat protectors on aliexpress for $25.00 each so i purchased 4 the long part [ back ] i will use to cover my seats and that left the short piece's
[ bottom and head rest piece's ] so i used up the smaller pieces and made a fiberglass moulded floor mat with a non slip backing.
Here are some pic's of the steps.
Thanks Ian.

Old cheap looking floor mat


non slip backing to account for its thickness


laying fiberglass and brushed with epoxy resin


plastic bag on top of resin and then sand to keep it all flat and moulded


all dry and with alloy foot/heal plate


fixed a few spots and sanded flat


super glue the pieces together


glued on the fake leather with spray adhesive


glued on non slip backing with spray adhesive


super glued on edge trim


and here's how it looks


not as cheap looking as the first pic and easy to clean and vac and will not move i had to put a spacer and cut the foot rest a little so the mat can be removed and replaced without undoing the foot rest every time

mr rxeven

iTrader: (1)

And here is the what i started with it has the fake leather the non slip backing and the edge trim, and the floor mat all up costed about $50 dollars to make not including alloy foot / heal plate.

seat protector