Fiberglass moulded floor mat
I made some black floor mats and bolted on an alloy foot plate, but it would always move and need adjusting. and with the new alloy pedals it looked cheap.
I found some fake leather seat protectors on aliexpress for $25.00 each so i purchased 4 the long part [ back ] i will use to cover my seats and that left the short piece's [ bottom and head rest piece's ] so i used up the smaller pieces and made a fiberglass moulded floor mat with a non slip backing. Here are some pic's of the steps. Thanks Ian.https://cimg8.ibsrv.net/gimg/www.rx7...8eab87b34d.jpg Old cheap looking floor mat https://cimg3.ibsrv.net/gimg/www.rx7...f32fcd5e0f.jpg non slip backing to account for its thickness https://cimg5.ibsrv.net/gimg/www.rx7...60be4a5831.jpg laying fiberglass and brushed with epoxy resin https://cimg1.ibsrv.net/gimg/www.rx7...67f5ed4945.jpg plastic bag on top of resin and then sand to keep it all flat and moulded https://cimg3.ibsrv.net/gimg/www.rx7...eb96456495.jpg all dry and with alloy foot/heal plate https://cimg5.ibsrv.net/gimg/www.rx7...44e455bf81.jpg fixed a few spots and sanded flat https://cimg1.ibsrv.net/gimg/www.rx7...783547b842.jpg super glue the pieces together https://cimg5.ibsrv.net/gimg/www.rx7...ef7c66f9d1.jpg glued on the fake leather with spray adhesive https://cimg0.ibsrv.net/gimg/www.rx7...9c7c7b9a7a.jpg glued on non slip backing with spray adhesive https://cimg2.ibsrv.net/gimg/www.rx7...3dd19b38d8.jpg super glued on edge trim https://cimg5.ibsrv.net/gimg/www.rx7...e2b4942e5b.jpg and here's how it looks https://cimg2.ibsrv.net/gimg/www.rx7...d147a03113.jpg not as cheap looking as the first pic and easy to clean and vac and will not move i had to put a spacer and cut the foot rest a little so the mat can be removed and replaced without undoing the foot rest every time |
And here is the what i started with it has the fake leather the non slip backing and the edge trim, and the floor mat all up costed about $50 dollars to make not including alloy foot / heal plate.https://cimg3.ibsrv.net/gimg/www.rx7...48a601f4cf.jpg
seat protector |
All times are GMT -5. The time now is 01:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands