derty

I am stuck between these 2 front bumpers need a little community help on choosing.

1. Feed Front (sold by rx7store.net)
2. 99 Spec Front whole kit

Which one does everyone prefer? I like both so I just need some little help. Thanks!

Sprockett

I personally like the FEED bumper because it looks like the '99 spec but a little more aggressive. I still think the '99 spec is really nice, but it looks a little too much like it's smilling at me.

Sprockett

FEED:


'99 Spec:

allrotor93

iTrader: (126)

i say feed

SpeedKing

iTrader: (4)

That "Feed Front (sold by rx7store.net)" is actually a replica (go ahead and check ).

Personally, I like the '99 front. IMO it looks better (elegant in a simple way), and OEM always fits right.

CCarlisi

99 spec. The others look ghetto

rybrx7

depends what other body mods you have? rest of it stock? 99 spec, aftermarket skirts, and/or rear bumper? FEED.

Boosted!

99'
and that red FD with the 99" is bad ***!

SNracing

if you go with the feed, make sure its the real feed bumper, not the replica. the replica doesnt fit on right, but the 1 feed makes does. either 1 is nice, ive been debating between these to ever since i got the car.

bigmack000

i am goin feed.
joel

RX7-2NR

FEED 4 SURE!
Get the new hid lights for the bumper and the canards (version 2r)

|aFk| LiMiTz

Anyone not like the hole in the side of the feed front end? Other than that its really nice. Damn the 99 spec looks nice but the front plate holder destroys the lines. If you shave the plate off it looks like it is smiling. I wonder if you could fill in the hole in the feed and then add a 99 spec lip below the feed bumper ...that would look nice

bigmack000

if you got a good body man you can fill the hoel with fiber glass. and have it all smooth. might clean it up a bit but meh. looks ok to me.
joel

SNracing

just take your front bumper off... you will get much more air flow to everything....

allrotor93

iTrader: (126)

mine fit damn good. i had the mb auto bumper on my last car and it fit well too.

mazdaspeed00

iTrader: (6)

99 front

hyper7

99 spec all the way! and its urethane, bends instead of cracks

911GT2

Get the Feed one, just so there won't be too many guys running around with the 99 spec when I get mine

user 9348703

I like them both!

I hate picking AERO actually since I like so many aero kits, but my aero kit got picked for me now hehe so it will be up here soon.

DJDINO

99 Spec. Aftermarket front ends will go out of style or get played out.

user 9348703

So your saying stock wont?

Then why are a lot of people changing from the 93-98 bumpers to anything else.

OEM goes out too, maybe not as quick your right, but it does...

Shinobi-X

If you're going feed, I would say you have to add a bit more subtle touches to make it fit the car, whereas 99spec would look nice by itself.

If you want it to look like a kit car, get the feed. I prefer a stock look (as much as possible, including painted CF) myself.

Alpha-7

iTrader: (1)

allrotor93 plz post some more pics of your car with the new blitz wheels...

Sparkey

i would go feed but i would go with the type 2r front end. as well as the feed cf sideskirts and feed wing with cf flap very very nice look to all of that and you would be unique and not like everyone else with 99 spec. just my two cents.

adidashatesnike

iTrader: (1)

Where would you go about getting a OEM 99 spec kit? Cuz i need tail lights and a front bumper and I might as well go 99 spec but I have no idea were to start looking for 99 spec parts.